Search Results

This paper, presents the design of a temperature sensor based on RO (Ring Oscillator) in order to make a thermal study for the detection and localization of thermal peaks in a complex system. In this work, a simulation and FPGA implementation of a fully digital temperature sensor features a number of exact inverters that can…

Constant Envelope Discrete Cosine Transform based Orthogonal Frequency Division Multiplexing (CE-DCT-OFDM) system with M-ary Pulse Amplitude Modulation (PAM) mapper is considered. In the system phase modulation is used to achieve constant envelope signals that have 0 dB Peak-to-Average-Power Ratio (PAPR). Transmission of such signals permit high power amplifiers in the system to operate with maximum…

This paper addresses the motion planning problem of Reeds-Shepp-type car-like mobile robots moving among static and dynamic obstacles. If the positions and the velocity vectors of the obstacles are known or well estimated, the Velocity Obstacles (VO) method and its non-linear version (NLVO) can be used to plan a collision-free trajectory for a robot in…

The key objective of this study is to analyse the heat transfer processes involved in the evaporation and condensation of water in a water distillation system employing a thermoelectric module. This analysis can help to increase the water production and to enhance the system performance. For the analysis, a water distillation unit prototype integrated with…

This article describes the modeling procedure of a direct resistive heat model of the molybdenum sheet and its simulation with electrodes made from various materials. The main characteristic of the proposed model is its dynamic behavior, because model considers the movement of the molybdenum sheet. The simulation results are mutually compared and the optimal material…

The United Arab Emirates (UAE) is dedicated to establishing the best teaching and learning environment for students and staff across all higher education institutions. To heed this call, the engineering division adopted the Learning-by-Doing (LBD) pedagogical philosophy for 21st Century education at the heart of its strategic directions. This study intends to explore how LBD…

In today’s information based world, it is increasingly important to safeguard the data owned by any organization, be it intellectual property or personal information. With ever increasing sophistication of malware, it is imperative to come up with an automated and advanced methods of attack vector recognition and isolation. Existing methods are not dynamic enough to…

This paper proposed the identification of the proper placement of UPFC (Unified Power Flow Controller) using a series of methodological numeric simulations to improve voltage stability. For this purpose, the critical zone of the system is determined, then, comparative analyses depending on different emplacements of UPFC are performed. The dynamic model of UPFC and the…

 denotes circulant graph  of order  for a set  where  Circulant graph  is said to have the Cayley Isomorphism (CI) property if whenever  is isomorphic to , there is some  for which . In this paper, isomorphic properties of circulant graphs that includes  Self-complementary circulant graphs;  Type-2 isomorphism, a new type of isomorphism other than already known Adam’s isomorphism of circulant graphs and  Cartesian product and factorization of…

In remote measurements on large-sized objects main focus is on measuring deformations of bridge surfaces and determination of the dynamic amplification factor in particular. The proposed method estimates deflections of entire lower surface of a bridge due to placement of secondary radiators on this surface. Antenna array directivity pattern (ADP) is distorted during deflection of…

The automotive industry has focused to use polymer materials in order to increase energy efficiency. So, the industry pays attention to use 3D printing technologies using several polymers. Among several 3D printer technologies, fused deposition modeling (FDM) is one of the popular 3D printing technologies due to an inexpensive extrusion machine and multi-material printing. FDM…

This paper proposes extended-range high-speed control for an IPMSM drive system. A simple real-time tuning flux-weakening control algorithm is proposed and implemented to control an IPMSM drive system in a wide variable speed range, from 3 r/min up to 2700 r/min. This flux-weakening control algorithm does not require any motor parameters and only needs simple…

This research work is novel technique to control and optimize SSSC (Subsynchronous Series Controller) functions with degree of precision in between Qatar and Kingdom of Saudi Arabia. The SSSC model developed and simulated in order to identify and determine its control and functioning parameters by introducing new tuning parameters based on that the SSSC can…

This paper proposes a novel approach to sensor and actuator integrity monitoring in a dynamic system. Multiple sensor and actuator faults can be detected. Furthermore, faulty sensors and actuators are isolated by contribution analysis. Most importantly, fault magnitudes can be correctly estimated and failed sensors or actuators outputs can be reconstructed. The proposed approach is…

Cognitive Radio (CR) encompasses a number of technologies which enable adaptive self-programing of systems at different levels to provide more effective use of the increasingly congested radio spectrum. CRs have potential to use spectrum allocated to TV services, which is not used by the primary user (TV), without causing disruptive interference to licensed users by…

Aging is a natural process that progressively introduces limitations in a person’s life, which can have dramatic effects on the person’s lifestyle and wellbeing and in most cases is related to the strength of the person’s social bonds with the family and friends group. Therefore, it is important to maintain these bonds in the various…

Economic gains are generally the outcome of industrialization and consequently urbanization. However, positive fiscal index generates a negative impact on natural environment sources heaving pollutant burden on soil, air and water. Industries throw tones of contaminated water into soil and water bodies without proper treatment and create a potential threat for both living and non-living…

Electroencephalography (EEG) can globally monitor neural activity in millisecond scale, which is critical for identifying causality of human brain functions and mechanisms. However, to obtain accurate EEG stimulation-response relationship one usually needs to repeat multiple-ten times of stimulation-response recording to average out background signals of other irreverent brain activities, making real-time monitoring difficult to be…

Education is the raising of the thinking process and developing the mind in a broader perspective. However, education that is comprehensive and appropriate to the individual according to its potential, ability and skill is too hardest to describe. Thus, matching and referral institutions, including education model that suits the person’s behavior has been receiving attention.…

Cloud providers seek to maximize their market share. Traditionally, they deploy datacenters with sufficient capacity to accommodate their entire computing demand while maintaining geographical affinity to its customers. Achieving these goals by a single cloud provider is increasingly unrealistic from a cost of ownership perspective. Moreover, the carbon emissions from underutilized datacenters place an increasing…

Interconnection of the power system utilities and grids offers a formidable dispute in front of design engineers. With the interconnections, power system has emerged as a more intricate and nonlinear system. Recent years small signal stability problems have achieved much significance along with the conventional transient constancy problems. Transient stability of the power system can…

This paper proposed an Optical Markup Recognition (OMR) system to be used to detect shaded options of students after MCQ-type examinations. The designed system employed the pixel-based unsupervised classification approach with image pre-processing strategies and compared its efficiencies, in terms of speed and accuracy, with object-based supervised or unsupervised classification OMR systems. Speed and accuracy…

An empirical study that examines the usage of known vulnerable statements in software systems developed in C/C++ and used for IoT is presented. The study is conducted on 18 open source systems comprised of millions of lines of code and containing thousands of files. Static analysis methods are applied to each system to determine the…

This paper is an extension of work originally presented at conference Applied Machine Intelligence and Informatics (SAMI), 2017 IEEE 13th International Symposium. The article performs a comparative study between the image compression technique Local Binary Compressed format (LBC) proposed by the authors and the standard image compression techniques used today (BMP, JPEG, PNG and GIF).…

The For the last three decades, end-to-end computing paradigms, such as MPI (Message Passing Interface), RPC (Remote Procedure Call) and RMI (Remote Method Invocation), have been the de facto paradigms for distributed and parallel programming. Despite of the successes, applications built using these paradigms suffer due to the proportionality factor of crash in the application…