Search Results

Manufacturing industry is facing several challenges in power quality and energy consumptions that play a significant role in the cost of goods sold in addition to the operational efficiency of manufacturing plants. The current techniques are not enough to manage the manufacturing processes from power perspectives as it is focusing only on the monitoring of…

The technics of maximum power point tracking is widely used in solar photovoltaic energy and electric power system applications. Traditionally, these technics are based on conventional methods like perturb and observe and incremental conductance. In this work, three methods based on particle swarms optimization, incremental conductance and adaptive neuro fuzzy inference system are presented. A…

Nigerian power utility companies particularly the distribution and generation aspects were recently in the process of national power reform converted from public to private service by privatization. Prior to these development, power utility companies’ performance is low due to poor operational style that leads to inadequate revenue generation. Thus, the task before the privatized companies…

Jeju Island is the largest island of South Korea and has an independent electric supply system. The island has a special energy plan that realizes itself a carbon-free region by 2030. Wind and solar energy resources are considered as an important means. The introduction of weather-variable renewable energy generation sources into the electric power system…

The reformation of energy hubs has significantly augmented the apprehensions about the levels of dependency between different energy sources which often can also be discussed as independent systems conventionally. This research brings focus on the formulation and analysis of an integrated system with bi-directional energy conversions and its effects on the stability of the system…

DC power is apparently attempting to breach into the power system – the system which it once lost to the AC power paradigm. DC is already present in the generation, transmission and utilization sides of the system, leaving distribution as the only area where it has not shown any significant presence – this may be…

The pitch angle controller maintains the aerodynamic captured power at rated level when the wind speed is above the rated speed. Besides, it can also improve the transient stability occurring in the wind energy system (WES). This paper, therefore, proposes an effective pitch angle control strategy that can deliver the conditioned output power in windy…

Reliable operation of a power transformer with a certain load depends on the technical condition of individual construction parts and the ability to prevent defects that can cause a failure. During the lifecycle of a transformer, valuable data is constantly accumulated, which forms the basis for technical or risk assessment of the equipment. Therefore it…

This research work is novel technique to control and optimize SSSC (Subsynchronous Series Controller) functions with degree of precision in between Qatar and Kingdom of Saudi Arabia. The SSSC model developed and simulated in order to identify and determine its control and functioning parameters by introducing new tuning parameters based on that the SSSC can…

Speaking about the commutation’s equipment, it can be said that the best solution in increasing reliability and lowering the maintenance costs is a continuous monitoring of the equipment. However, if the price/quality ratio is considered, it is obvious that, for the moment, the diagnosis can be also an acceptable solution. Nowadays the predictive maintenance for…

A method for optimal sizing of hybrid system consisting of a Photovoltaic (PV) panel, diesel generator, Battery banks and load is considered in this paper. To this end a novel approach is proposed. More precisely a methodology for the design and simulation of the behavior of Hybrid system PV-Diesel-Battery banks to electrify an isolated rural…

The integration of fluctuating renewable resources such as wind and solar into existing power systems poses challenges to grid reliability and the seamless incorporation of these resources. To address the inherent variability in renewable generation, direct load control emerges as a promising method for demand-side management. Thermostatically controlled appliances, like air conditioners, hold a significant…

Many millions of people have adverse effects on their lives, both socially and economically, when a power outage occurs. Along with other electrical events, the lack of Situational Awareness (SA) is one of the root causes of power system outages. In order to promote adequate situational awareness, both power system and microgrid interfaces should communicate…

Massive integration of inverter dominated renewable energy systems (RESs), i.e., wind turbines (WTs), reduces the reliance on conventional alternator-based power stations. The system inertia and damping aspects of the power system were significantly decreased by this extensive integration of inverter-based WT system, which impacts on the fault ride-through (FRT) competence and thus precipitates the frequency…

It is widely known that cities now house more than half of the world’s population. Within this framework, this study presents the possibilities for real-world application of renewable energy sources (RES) in urban areas, as well as their contribution to the urban deployment of the new energy paradigm. A comparison is made between hybrid power…

The phasor Measurement Unit is a modern tracking tool mounted on a network to track and manage power systems. PMU is accurate and time-synchronized device that gives voltage phasor measurements in nodes and current phasor measurements connected to those nodes where the PMU is installed. This study introduces the Genetic Algorithm for optimization of allocation…

Solar energy becomes widely used in the global power grid. Therefore, enhancing the accuracy of solar energy predictions is essential for the efficient planning, managing and operating of power systems. To minimize the negatives impacts of photovoltaics on electricity and energy systems, an approach to highly accurate and advanced forecasting is urgently needed. In this…

In the present paper, a universal approach for determining the maximum flow problem in directed graph for solving different problems is applied. It can be considered as a heuristic and it can be used as a denomination for analyzing an arbitrary system with a mathematical description as a directed graph. The physical nature of the…

In this paper we are demonstrating the importance of building and achieving a renewable electrical power system that works in synchronization with the grid. The average of consumption, generation and the negative environmental effect of generating power were analyzed. This paper is divided into three parts, one was analyzed with Green Building Studio software and…

Harmonic distortion is a problem that can be caused by the use of power electronic devices. The effect of harmonics has an impact on changes in the input voltage source waveform which is referred to as wave defects. This incident has an impact on electronic faults and overheating of the power transformer coil as a…

In the recent times power shortage has been a major setback to deal for the effective operation of power systems. Bridging the gap between generation and demand is known as Demand Side Management (DSM). For an effective DSM strategy to be implemented, it is crucial that both utility and customers be involved. By DSM, the…

The entire electrical system is changing at an abrupt speed since its beginning. With the rapid advance of renewable energies (which are constantly subject to fluctuations), the electricity generation is distributed to countless locations. The traditional model of the unidirectional flow of electricity is leaning towards multidirectional flows. This situation needs significant changes in the…

The occurrence of many failures in the power system can lead to power instability and affects the system parameters to go beyond its operating limits. It may lead to obstructing the secure operations and reliability of power systems. Ensuring power system security needs proper actions to be taken for the undesirable contingency. Thus, security analysis…

The contemporary electrical power systems (EPS) impose increased requirements for the functionality of the protection systems. The necessity of improved EPS stability is in some extent resulting of the increased integration of renewable sources of electrical energy. The future grid development gives perspective for connection of more converter based generations. The power electronic schemes and…

The aim of this paper is to develop a hybrid device for voltage stability enhancement using two kinds of FACTS (Flexible AC Transmission System) namely SVC (Static Var Compensator) and TCSC (Thyristor Controlled Series Capacitor). The idea behind the proposed method is to maintain safe and satisfactory power system operation in a lesser costing manner…