Search Results

This paper studied the influence of using hybrid additives of Nano Clay (NC) and Marble Powder (MP) on the structural behavior of columns, in terms of ultimate capacity, axial strain, lateral strain, toughness, and failure pattern. For this purpose, ten column specimens were made from reinforced concrete (RC), either normal or high strength, and were…

Virtual reality (VR) is finding applications in a wide range of industries; however, a significant number of users find VR experience considerably different from the real-world experience. To match the real-world experience, the VR experience should look real, should be immersive, and be in line with the users’ anticipation. Achieving realism in the virtual representation…

The effectiveness and suitability for the reliability and test of the embedded software of the automotive EHPS (Electrical Hydraulic Power Steering) pump are extensively explored in this paper. The Crow-AMSAA analysis has been applied to evaluate the embedded software reliability growth based on the failure data collected in the prototype phase and in the field.…

A methodology of medical signal-based biometrics has been proposed in this paper for implementing a human identification system controlled by electroencephalogram in respect of different color stimuli. The advantage of biosignal based biometrics is that they provide more efficient operation in simple experimental condition to ensure accurate identification. Red, Green, Blue (primary colors) and Yellow…

The Micro-facial expression is the most effective way to display human emotional state. But it needs an expert coder to be decoded. Recently, new computer vision technologies have emerged to automatically extract facial expressions from human faces. In this study, a video-based emotion analysis system is implemented to detect human faces and recognize their emotions…

Programming industrial robots in a real-life environment is a significant task necessary to be dealt with in modern facilities. The “pick up and place” task is undeniably one of the regular robot programming problems which needs to be solved. At the beginning of the “pick and place” task, the position determination and exact detection of…

Fossil fuel can no longer supply the constantly spiking demands of energy around the world, hence the increasing research on renewable energies as an alternative. The Stirling Engine is an external combustion engine, giving us a wide range of heat sources: solar, nuclear. The Stirling engine makes best of use of solar sources in an…

Harassment and violence against women have become one of the social security problems in Bangladesh. In this paper, we aim to develop safety devices for women named BOHNNI and BADHON which resemble legitimate jewelry. We used a microcontroller for the hardware device to make it most decisive and less immoderate. BOHNNI, a locating device, is…

Coordinated MultiPoint (CoMP) has been introduced for LTE-Advanced system to overcome the inter-cell interference problems and enhance the signal quality of cell-edge UEs (User Equipments). With such concept, the overall system performance should be improved considerably to support the significantly increasing amount of demand on data transmission via mobile communication that happens nowadays. Dynamic Point…

This article aims to determine to what extent the self-perception of acquiring professional skills has been affect ed, by the context of the Covid-19 pandemic in University Students of Business Administration; For which, the results obtained in two satisfaction survey processes, carried out in academic semesters 2019-B and 2020-A, have been compared, marking a before…

This article aims at comparing two controls to follow the maximum power point, making use of DC-DC converters for PV uses. All transformers operate continuously. To fulfil maximum power, we will exploit two MPPT controls: a traditional perturb – observe ‘P&O’ and a smart one – the fuzzy logic ‘FL’. The goal of this article…

Biodiesel was produced from lard using a CaO catalyst derived from eggshells. The effects of catalyst loading and transesterification reaction time were investigated. The results revealed that the increase in yield of biodiesel occurred at all catalyst loading when the reaction time was increased. The optimal reaction time was obtained at 60 minutes. The results…

This paper aims to measure the acceptance level of Indonesian customers to JD.ID X retail and to reveal the driving factors of behavioral intention to shop at the retail. JD.ID X is new retail that implements a new shopping technology called Just walk-out technology (JWOT) also known as retail without a cashier. JWOT is one…

Consideration of building energy performance in the early stage of the design process is very important to help minimizing energy consumed by the built environment. Therefore, help in minimizing energy crisis problem. Optimization of building form and orientation at the early stage of the design process can save a significant amount of energy consumed by…

In view of the current short-term traffic flow prediction methods that fail to fully consider the spatial correlation of traffic flow, and fail to make full use of historical data features, resulting in low prediction accuracy and poor robustness. Therefore, in paper, combining Non-negative Matrix Factorization (NMF) and LSTM model Based on Attention Mechanism (AttLSTM),…

The behavior of rivers’ hydrology and flow under changing climate has been an objective of interest for long time. In this study the impacts of climate change on streamflow of the Arkansas River will be investigated. The paper is an extension of work originally presented in ASET conference in Dubai. The Arkansas River is a…

This is a report describing the impact of calcination on the morphological and optical properties of nanoparticles Iron doped-nickel oxide. By synthetic precipitation, the technique makes use of it. Three samples have been calcined in different temperatures and were characterized by X-ray diffraction (XRD), Fourier transforms infrared spectroscopy (FTIR), UV spectroscopy, and scanning electron microscopy…

The article investigated the banking determinants of loans’ growth using the quarterly data of Albanian banking sector during 2003-2018. We estimated the linear model of control variables to examine the bank’s sound effects on loan’s capacity. Empirical results demonstrated the initial positive outcome of the growth of non – performing loans on the loans’ growth,…

In this paper, we are concerned to investigate the efficiency of the second-order Redlich-Kister Finite Difference (RKFD) discretization scheme together with the Four Point Explicit Group Kaudd Successive Over Relaxation (4EGKSOR) iterative method for solving two-point boundary value problems (TPBVPs). In order to apply this block iteration to solve any linear system, firstly we discretize…

The paper treats a problem for detection and recognition objects in computer vision sector, where researchers recommended OpenCV software and development tool, it’s several and better-remembered library resource for isolating, detecting, and recognition of particular objects, what we would find an appropriate system for detecting and recognition traffic roads signs. The robustness with optimization is…

Cardiovascular diseases are the group of conditions produced in the heart or blood vessels. This is one of the main causes of death in Peru and the world, produced mostly by non-communicable diseases and harmful habits, which makes it an extremely predictable disease. These factors include body mass index, smoking, diabetes, age, blood pressure, total…

Internet of Things (IoT) is changing the world through a new wave of revolution for communications technologies that are no more limited to the human being. One of the main challenges that result from the exponential spread of IoT technology is the difference in the traffic characteristics between classical human communications and advanced things communications.…

The progress of information using websites is developing fast, impacting various sectors, one of which is pharmaceutical companies. Pharmaceutical companies have roles in drug manufacturing, pharmaceutical distribution, and essential services for the community—the most important and challenging activity in the IT department. The researcher is responsible for one of the Bandung pharmaceutical companies. Researchers are…

This research designed an image encryption system that focused on securing teledermatology data in the form of skin disease images. The encryption and decryption process of this system is done on the client side using chaos-based encryption with confusion and diffusion techniques. Arnold’s cat map is the chaotic map model used for confusion, while the…

In this work, a study of the process variation effects on the threshold voltage of a floating- gate device is proposed. The study demonstrates the sensitivity of the threshold voltage to five geometrical parameters including gate length, gate width, tunneling gate oxide thickness, bottom oxide-nitride-oxide oxide thickness, and nitride spacer thickness. This paper also proposed…