Search Results

Modern automobiles have been turning more and more into wireless sensor and communication networks. Accordingly, the number of radio systems is steadily increasing. Due to strict safety requirements, these radio systems need to be tested extensively for functionality and reliability, especially under poor radio channel conditions. Beside the large electrical size of cars at frequencies…

An Orthogonal Frequency Division Multiplexing (OFDM) system with Quadrature Phase Shift Keying (QPSK) mapper is considered. A novel low-complexity Tone Reservation (TR) technique is proposed for reduction of Peak-to-Average Power Ratio (PAPR) of the system. The technique is easy-to-implement and minimizes the search space of phases of reserved tones in the system. The ability of…

In this paper an omnidirectional dual band monopole antenna at 28 GHz and 60 GHz which is fit for indoor and outdoor wireless applications is developed. The proposed antenna consists of two rectangular patches with a T folded patch. The design, analysis, and optimization processes through this article are executed by the numerical method, Finite…

Service providers are transferring their static optical transport networks from semi-permanent connections to agile automatic switched optical networks (ASON) with dynamic optical connection provisioning and restoration. To achieve this goal, service providers are looking for flexible optical network ROADMs with CDC capabilities. Although many contention scenarios during network connection provisioning and restoration have been illustrated,…

In densely located loosely coupled wireless charger environments, cross-connection errors can occur when wireless chargers operate at the same time within the same wireless communication range. In this work, an effective algorithm is proposed to prevent cross-connection error. The algorithm based on the cross-connection abatement technique with the received signal strength indicator of out-band BLE…

This article presents the design and realization of decoder mobile for distress beacon 406 MHz. The use of the sparse Fourier transforms in the processing of distress beacon signals. The characteristics of these decoders are mobility, able to decode all the frequencies of the beacons. It locates with great precision the location of the emitting…

With the introduction of new services and new more sophisticated mobile devices the radio network operators are faced with new challanges to increase the system performance. The most recent standards introduced by 3GPP for the new architectures of the Long Term Evolution network address these issues and outline possibilities for optimizing network performance and user…

A design of elliptical printed dipole antenna based on neural network approach is presented in this paper for recent WiMAX, Bluetooth, WLAN, LTE, and future 5G applications. The dipole patch is printed on top of substrate which has relative permittivity of 2.2 and 0.787mm of thickness. The elliptical dipole antenna is single band and the…

An experimental investigation of reconfigurable ultra-wideband (UWB) modified octagonal microstrip monopole patch antenna with switchable and tunable band-notched characteristic is presented in this paper. Notched-bands are obtained by connecting or disconnecting the open shunt stubs. The switching is achieved by using PIN diodes. Additionally, more notch-bands are created by adding additional stubs to the original…

Fifth generation of mobile networks (5G) comes to cope with the context of the new mobile telecommunications era. Edge computing is a new collaborative technology under standardization utilizing end-user devices or near-end-user edge devices to operate processing, communication, or control operations. The achievement of efficient error control is a very critical aspect in the successful…

A low-complexity dual-band chirp FSK, direct conversion receiver is described in this paper. The receiver is dedicated to be used in the transceiver unit of a medical implantable wireless sensor. The system uses the RF band between 402 and 405 MHz. Two sub-bands frequencies employing chirped pulses are assigned for both binary information. The novelty…

This paper first simplifies the GA-optimized filter structure developed by us. Then the filter structure is modified by introducing slot and conductor stubs, based on electric fields and magnetic currents at resonant and transmission zero points. As a result, return losses in two passband regions are suppressed more than 28 dB, and also insertion loss…

The Industrial Internet of Things (IIoT), a typical use case of the Internet of Things, has been a great prospect for development in the near future. In the developing fifth generation mobile communications, the IIoT is an extremely important application case. In this paper, the channel propagation properties are researched and modeled based on the…

A dual-band 90-degree SiGe HBT active phase shifter based on band-pass and band-stop designs using dual-band resonators is presented in this paper. The active phase shifter employs differential configuration and has band-pass and band-stop filters in the load circuit. By switching two output ports of the differential amplifier, 90-degree phase shifting has been realized at…

Noise defined as ‘a sensation of unwanted intensity of a wave’, is perception of a pollutant and a type of environmental stressor. The unwanted intensity of a wave is a propagation of noise due to transmission of waves (viz. physical agents) such as light, sound, heat, electricity, fluid and fire. The characterization of noise interference,…

The data transmitted over wireless communication systems are affected by various elements as noise, interference or distortion, and to be able to combat these factors the paper propose the utilization of Redundant Residue Number System (RR NS) coding as a Forward Error Correction (FEC) technique to enhance the performance of MIMO-OFDM communication system compared to…

Residential schools can be a great place for students to learn and develop a different set of skills if the right environment is given to the child. Constant communication with parents can help the child to stay motivated and feel comfortable away from home, hence schools tend to provide various solutions to allow the student…

During sudden anti-terrorist drives conducted by the law enforcement agencies, a localized cyber security system happens to be a special tactic to avert the unprecedented massacre and gruesome fatalities against the residents of that area by disconnecting the affected territory from the rest of the world; so that the militants and their outside accomplices cannot…

In this paper we focus on the adaptive modulation and coding (AMC) techniques, makes use of the channel state information (CSI) to improve the spectral efficiency (SE) in wireless communication systems. To achieve higher data rates and lower bit error rate (BER’s) channel coding can be carried out in OFDM, called COFDM. The NLMS channel…

In this paper an efficient feedback quantization technic for beamforming in MIMO systems is presented. The proposed technic named time domain quantization TD-Q is based on the feedback of time domain parameters necessary for the reproduction of the beamforming matrix at the transmitter. This TD-Q presents the same performance than the conventional Givens rotation quantization…

The main target of this article is to study the provision of indoor service (coverage) using outdoor base station at higher frequencies i.e. 10 GHz, 30 GHz and 60 GHz. In an outdoor to indoor propagation, an angular wall loss model is used in the General Building Penetration (GBP) model for estimating the additional loss…

The Internet of Things (IOT) is a revolutionary communication technology which enables numerous heterogeneous objects to be inter-connected. In such a wireless system, interference management between the operating devices is an important challenge. Cognitive Radio (CR) seems to be a promising enabler transmission technology for the 5G-IOT system. The “sense-and-adapt” smart transmission strategy in CR…

Detect and tracking of moving weak targets is a complicated dynamic state estimation problem whose difficulty is increased in case of high clutter conditions or low signal to noise ratio (SNR). In this case, the track-before-detect filter (TBDF) that uses unthresholded measurements considers as an effective method for detecting and tracking a single target under…

This article proposes a new MAC scheme for Vehicle-to-Infrastructure (V2I) communications that dynamically reallocates unused TDMA slots. By maintaining a balanced waiting time, the proposed TDMA based scheduling scheme allocates TDMA slots in a rational way to minimize merging and one-hop neighboring collision. The proposed scheme ensures dynamic reallocation of unused slots by using “time…

Due to the increasing bandwidth requirement of modern wireless communication systems, developing antenna having wider bandwidth have been receiving significant attention in the recent years. In this paper, a comparative analysis of the contacting feed (micro strip line and coaxial probe) and non-contacting feed mechanism (both Aperture Coupling and Proximity Coupling) in micro strip patch…