Microelectromechanical Systems (MEMS) are devices made up of several electrical and mechanical components. They consist of mechanical functions (sensing, thermal, inertial) and electrical functions (switching, decision making) on a single chip made by microfabrication methods. These chips exhibit combined properties of the two functions. The size of system has characteristic dimensions less than 1mm but…

Quality assurance of modern-day safety-critical systems is continually facing new challenges with the increase in both the level of functionality they provide and their degree of interaction with their environment. We propose a novel selection method for black-box regression testing on the basis of machine learning techniques for increasing testing efficiency. Risk-aware selection decisions are…

In this paper, the performance and reliability of oxide-based Resistive RAM (ReRAM) memory is investigated in a 28nm FDSOI technology versus interconnects resistivity combined with device variability. Indeed, common problems with ReRAM are related to high variability in operating conditions and low yield. At a cell level ReRAMs suffer from variability. At an array level,…

The aim of this paper is to study the boundary enlarged gradient controllability problem governed by parabolic evolution equations. The purpose is to find and compute the control \(u\) which steers the gradient state from an initial gradient one \(\nabla y_{_{0}}\) to a gradient vector supposed to be unknown between two defined bounds \(b_1\) and…

In this paper, we present a novel secure cryptosystem for direct encryption of color images, based on an iterative mixing spread over three rounds of the R, G and B color channels and three enhanced chaotic maps. Each round includes an affine transformation that uses three invertible matrices of order 2 _ 2; whose parameters…

We develop a resolution of the Richards equation for the porous media of variable saturation by a finite element method. A formulation of interstitial pressure head and volumetric water content is used. A good conservation of the global and local mass is obtained. Some applications in the case of heterogeneous media are presented. These are…

The goal of this study was to use underwater robots instead of a diver’s observations to monitor and record the condition of an obstructed seabed in a shallow area. It is difficult to investigate marine resources that exist in deep water shaded by rock due to large and/or small rocks on the seabed. To solve…

Water quality assessment and prediction is a more and more important issue. Traditional ways either take lots of time or they can only do assessments. In this research, by applying machine learning algorithm to a long period time of water attributes’ data; we can generate a decision tree so that it can predict the future…

With the abundance of Internet and electronic devices bullying has moved its place from schools and backyards into cyberspace; to be now known as Cyberbullying. Cyberbullying is affecting a lot of children around the world, especially Arab countries. Thus concerns from cyberbullying are rising. A lot of research is ongoing with the purpose of diminishing…

This article is devoted to the problem of blocking the propagation of sound in a gas stream. This can be useful in the problems of pipeline acoustics and the design of automotive silencers, when it is necessary to ensure the opacity of the boundary (cross section of the pipe) for sound simultaneously with the free…

This paper proposed the identification of the proper placement of UPFC (Unified Power Flow Controller) using a series of methodological numeric simulations to improve voltage stability. For this purpose, the critical zone of the system is determined, then, comparative analyses depending on different emplacements of UPFC are performed. The dynamic model of UPFC and the…

The aim of this paper is to develop a hybrid device for voltage stability enhancement using two kinds of FACTS (Flexible AC Transmission System) namely SVC (Static Var Compensator) and TCSC (Thyristor Controlled Series Capacitor). The idea behind the proposed method is to maintain safe and satisfactory power system operation in a lesser costing manner…

In remote measurements on large-sized objects main focus is on measuring deformations of bridge surfaces and determination of the dynamic amplification factor in particular. The proposed method estimates deflections of entire lower surface of a bridge due to placement of secondary radiators on this surface. Antenna array directivity pattern (ADP) is distorted during deflection of…

Radio frequency Identification (RFID) is currently considered as one of the most used technologies for an automatic identification of objects or people. Based on a combination of tags and readers, RFID technology has widely been applied in various areas including supply chain, production and traffic control systems. However, despite of its numerous advantages, the technology…

This paper deals with the problem of Fault Tolerant Control (FTC) using PID-type Fuzzy Logic Controller (FLC) for an Electronic Throttle Valve (ETV) described by a switched discrete-time system with input disturbances and actuator faults. In order to detect the faults, Unknown Input Observers (UIOs) are designed and formulated in terms of Lyapunov theory and…

When we drive a car, we often want to know the circumstances of roads between the current location and the destination. Ishihara et al. proposed a Vehicular ad-hoc NETworks (VANET) -based information sharing system, called the Real-Time Visual Car Navigation System, in which a driver can obtain Location-Dependent Information (LDI), such as photographs or videos…

The paper shows a method of transforming an asynchronously feedbacked Mealy machine into a Moore machine. The transformation is done in dual-rail logic under the use of the RS-buffer. The transformed machine stabilizes itself and is safe to use. The transformation is visualized via KV-diagrams and calculated with formulas. We will present three use-cases for…

The resolution of the Navier-Stokes and Euler equations by the finite element method is the focus of this paper. These equations are solved in conservative form using, as unknown variables, the so-called conservative variables (density, momentum per unit volume and total energy per unit volume). The variational formulation developed is a variant of the Petrov-Galerkin…

In this article we will present a method simplifying 3D point clouds. This method is based on the Shannon entropy. This technique of simplification is a hybrid technique where we use the notion of clustering and iterative computation. In this paper, our main objective is to apply our method on different clouds of 3D points.…

The automotive industry has focused to use polymer materials in order to increase energy efficiency. So, the industry pays attention to use 3D printing technologies using several polymers. Among several 3D printer technologies, fused deposition modeling (FDM) is one of the popular 3D printing technologies due to an inexpensive extrusion machine and multi-material printing. FDM…

In modern powers systems, one of the most considerable topics is economic load dispatch (ELD). ELD is non-linear problem and it became non-convex and non-smooth problem with some constraints such as valve point loading effect. ELD is very crucial for energy generation and distribution in power systems. For solving ELD problem, a lot of methods…

Combinatorial optimization is an area of great importance since many of the real-world problems have discrete parameters which are part of the objective function to be optimized. Development of combinatorial optimization algorithms is guided by the empirical study of the candidate ideas and their performance over a wide range of settings or scenarios to infer…

In this paper, a hybrid system solar cell antenna was studied. Our contribution lies in the combination of both optical and radio-frequency signals in a solar cell antenna. Hence, we propose a new method to merge antenna and solar cell. The leaf- shaped patch solar cell antenna was dedicated at a time to the energy…

The antenna proposed is a new geomantic structure of Ultra-Wideband (UWB) Anti- Podal Vivaldi antenna (AVA). It remarkably offers an attractive performance over the bands of cellular networks. However, its benefits are not limited only in particular applications, whereas radar imaging, mining detection, the biomedical science in the heating of brain cancer tumor and treatment,…

In acronym Captology – Computers as Persuasive Technology, a persuasive component (lat. persuasibilibus – enticing) refers to the persuasive stimulation by intelligent technologies. Latter being transitive and interactive as intelligent systems, they have imposed, by their persuasivity, a ‘cult of information’, after which information has become a type of goods that as a utilitarian resource…