Search Results

Carbon nanotube field effect transistor (CNTFET) has a huge advantage over the Si- MOSFET. In MOSFET switching occurs by altering channel resistivity whereas in CNTFET switching occurs by modulation contact resistance. CNTFET generates three to four times of drive current than MOSFET. Transconductance of CNTFET is four times higher than the MOSFET. The average carrier…

This paper reports on the successful deposition of amorphous carbon nitride thin films (a-CNx). Samples were deposited using a DC-pulsed sputtering technique in CH3CH2OH-N2 atmosphere at constant pressure (1 Torr). Raman spectra were collected to investigate the bonding structure of the deposed thin films, while scanning electron microscopy (SEM) and atomic force microscopy (AFM) were…

The construction industry has undergone several changes in recent years linked to new laws and international conventions aimed at protecting the environment and combating pollution. Construction industry alone produces tons of waste annually due to debris produced either during construction or during deconstruction. To combat this, companies are forced to control their debris either by…

The present work focuses on the effect of adding gum Arabic on the setting time of cement pastes, workability, and compressive strength of concrete. For workability and compressive strength liquid gum Arabic was added to concrete mixes at ratios of 0.0% (control mix), 0.3%, 0.5%, 0.7% of the weight of cement. In addition, from 0.1%…

Graphene oxide (GO) was prepared by the modified Hummer’s method, but the mass ratio of graphite to sodium nitrate (NaNO3) was varied from 2:1, 1:1, and 1:2. The primary reason for the variation was to determine the optimum conditions that would afford more oxygen functional groups to improve the material for application in adsorption. The…

A systematic study of wide bandgap (WBG) based light emitting diodes (LEDs) and photodiodes (PDs) were conducted for the assessment of modular integration of optoelectronic devices into power modules. The temperature dependence of the photoluminescence (PL) efficiency of Indium gallium nitride/Gallium nitride (InGaN/GaN) multiple quantum wells (MQWs) material was studied from 10 to 800 K.…

Metal (silver)-Assisted Chemical Etching (MACE) method is used to fabricate silicon nanostructures like silicon nanowires (SiNWs) and silicon nanocones (SiNCs). The morphological characterization of fabricated SiNWs has shown that 5 minutes is the optimal time of silver deposition on silicon substrate. Silicon nanocones (SiNCs) were also fabricated by etching vertical SiNWs with a AgNO3=HF=H2O2 solution.…

Four different soundscapes with different loudness and spectral distributions were recorded in Zagreb (capital of Croatia) and reproduced to two groups of listeners while they were performing a concentration demanding task – a simplified variation of the memory game. These two groups of test subjects listened to the same soundscapes but with different loudness distribution.…

Noise defined as ‘a sensation of unwanted intensity of a wave’, is perception of a pollutant and a type of environmental stressor. The unwanted intensity of a wave is a propagation of noise due to transmission of waves (viz. physical agents) such as light, sound, heat, electricity, fluid and fire. The characterization of noise interference,…

This work describes computerized data acquisition system for current-voltage (I-V) characteristics of diodes. The proposed system consist of a personal computer pre-installed with LabVIEW, two units of power supply, an interface board, current and voltage sensors. Two devices under test (DUTs) are selected namely 1N4007 silicon and 1N34 germanium diodes. The current flow through the…

In this paper the design of a new 3D magnetic field (H-field) probe with a near-field scanning system is presented, then the near electromagnetic fields radiated by a Library RFID system is characterized. The proposed system is developed in order to determine the magnetic near-field emitted by electronic devices. The designed isotropic H-field probe consists…

Flavonoid is one of the bioactive compounds that are currently used in pharmaceutical and medicinal industries due to their health benefit. The focus of current research is mainly on the extraction and isolation of bioactive compounds; however non to date has explored on the identification of flavonoids classes under the Fourier Transform Infrared spectroscopy (FTIR).…

A thrombus or a blood clot is the result of blood coagulation which is a natural process to prevent bleeding. An inappropriate formation of a thrombus in a deep vein is known as Deep Venous Thrombosis (DVT). The main complication of a DVT is a Pulmonary Embolism (PE) which occurs when a thrombus breaks loose…

Optoelectronic devices applications based on Organic–inorganic perovskites are promising and effective low-cost energy materials due to their exceptional physical properties which include high carrier mobility, high optical absorption coefficient, and long carrier diffusion length. In the presented work, a TiO2/NiO+5% Fe quantum dots (QDs)–doped CsMAFAPbI2Br2 perovskite heterojunction broadband photodetector was fabricated on FTO/glass substrate. The…

Nigeria has one of the highest deforestation rates in the world, due mainly to felling of trees for fuelwood and charcoal production. This challenge could be managed if agricultural waste briquettes are used to augment the fuelwood demand for cooking energy provisioning. Energy density of biomass fuels can be raised by blending with coal, but…

The aim of this study is, on the one hand learn about this type of wood, and on the other hand, is to study the processes the thermophysical characterization of araucaria wood from the city of el Jadida, Morocco, and on the other hand, will study the processes related to evaporation. Wood is defined industrially…

The results investigated in this work are toward the optimization of the photonic crystal structures in 1D and 2D scale. One-dimensional distributed Bragg reflectors (DBRs) have demonstrated substantial potential in various optoelectronic applications, due to the observed tunable optical band-gap. Herein, the use of DBRs in light trapping solar cells was simulated and validated, representing…

Traditional crossroads use traffic lights, but may cause delays due to its stop and wait process. Moreover, autonomous vehicles are being made, although it is not yet mass-produced. This work presents a design and implementation of an agile system that communicates and coordinates autonomous vehicles entering the intersection by adjusting their speeds and maneuvers to…

This is era of new technology; most of information is collected from internet, web sites. Some people uses data from research papers, thesis, and website as it is and publish as their own research without giving proper acknowledgement. This term is known as plagiarism. There are two types of plagiarism detection methods, i) Extrinsic plagiarism…

This research focussed on assessing the impact of using upgraded biogas from chicken waste on the performance of a gasoline generator. In the study, the characteristics of raw biogas were determined and a biogas upgrading device was developed before assessing the generator performance on upgraded biogas. A Geotech GA 2000 plus gas analyser was used…

In this work, we investigate the effects of variation of processing parameters on the quality of dispersion of polycarbonate compound. In order to achieve appropriate pigments dispersion, we performed compounding process parameters optimizations, by investigating three processing parameters, temperature, screw speed, and feed rate. We utilized experimental design for the optimization of process parameters based…

Through-Silicon-Vias (TSVs) are utilized for high density 3D integration, which induce crosstalk problems and impact signal integrity. This paper focuses on TSV crosstalk characterization in 3D integrated circuits, where several TSV physical and environmental configurations are investigated. In particular, this work shows a detailed study on the influence of signal-ground TSV locations, distances and their…

With the increasing integration level of electronic circuits management of the generated heat became one of the most important design aspects. Beside the semiconductor components capacitors are also affected by the elevated temperature. In this paper a new thermal characterization method is proposed adopting the thermal transient measurement technique for capacitors utilizing the capacitance itself…

This paper presents on-chip testing structures to characterize and detect faulty Through Silicon Vias (TSVs) in 3D ICs technology. 3D Gunning Transceiver Logic (GTL) I/O testing is proposed to characterize the performance of 3D TSVs in high speed applications. The GTL testing circuit will fire different data patterns at different frequencies to characterize the transient…

This paper presents a developed low cost system for human gait analysis. Two web cameras placed in opposite sides of a treadmill are used to acquire images of a person walking at different speeds on a treadmill, carrying a set of passive marks located at strategic places of its body. The treadmill also has passive…