Search Results

This paper presents the design and fabrication of an electromagnetically actuated PCB-based resonating scanning micro-mirror for LiDAR applications, with optimization targeted towards low-cost fabrication and a high scanning angle. Traditional silicon MEMS-based micro-mirrors, while offering high precision and compatibility with CMOS processing, are limited by fragility at low scanning frequencies and costly fabrication processes. To…

This study addresses the need for improved prognostics in switch-mode power supplies (SMPS) that incorporate electromagnetic interference (EMI) filters, with a focus on aluminum electrolytic capacitors, which are critical for the reliability of these systems. The primary aim is to develop a robust model-based approach that can accurately predict the degradation and operational lifetime of…

In this paper, we investigate the utilization of three effective detection methods to identify potential threats of insects in date palm trees. The detection techniques presented here are the application of infrared radiation, microwave antennas and metamaterials based sensors. Experimental trials using IR radiation took place in a local farm. Moreover, the second sensing system…

A very large number of workers is occupationally exposed to Optical Radiation (OR) worldwide, while indeed nowadays an exposure to Electromagnetic fields (EMF) can occur in almost all workplaces. OR origin can be natural, including the most relevant source, i.e. the sun, or artificial, that can be further classified in incoherent and coherent, i.e. the…

This paper is an extension of Novel Flexible Chip-less Bow-Tie RFID tag in which we presented the design, testing and fabrication of the tag and compared the results with Octagonal Chipless RFID tag. The chipless RFID tag was designed by using simulation software CST microwave studio and fabricated by using laser etching technique on a…

Microelectromechanical Systems (MEMS) are devices made up of several electrical and mechanical components. They consist of mechanical functions (sensing, thermal, inertial) and electrical functions (switching, decision making) on a single chip made by microfabrication methods. These chips exhibit combined properties of the two functions. The size of system has characteristic dimensions less than 1mm but…

High frequency planar transformer is a new type of transformer that operates at high frequency. Its significance is proved through its miniaturised features, high power density and other performances. The design of planar transformer needs to consider several fundamental factors, including core material, dimension of layers and winding pattern. As the volume decreases, extra attentions…

The processes of reflection of three-dimensional electromagnetic waves by locally irregular media interfaces are investigated. The problem under study is mathematically reduced to the solution of a boundary value problem for the Maxwell equations in an infinite space with an irregular boundary. In order to develop a numerical algorithm, the potential theory and a special…

Continuously Variable Series Reactor (CVSR) is a device that can vary the reactance in an ac circuit by controlling the magnetization of a ferromagnetic core, shared by ac and dc windings. The bias dc current can change the equivalent ac reactance(inductance) in order to, for example, control load flow, damp oscillations, or fault current limitation.…

In this paper, Compact bandpass filters have been designed. A single bandpass filter was designed using novel triple concentric complementary split-ring resonators placed along the microstrip line in the ground plane. Gaps and via were placed on the microstrip line to control electromagnetic characteristics, resulting in a single bandpass filter. In turn, spiral resonators were…

A reconfigurable Stepped Frequency Continuous Wave (SFCW) radar prototype for supporting the italian financial police to contrast smuggling, is proposed in this work. In particular, the proposed radar can provide information related to the container contents and the presence of false bottoms speeding up the control operations at borders and ports. Moreover, it is able…

A new approach for designing RF energy harvester with a single stage converter circuit is presented in this paper. The proposed converter configuration is integrated with an antenna that is based on the coplanar waveguide (CPW) transmission line with improved gain resonated at 2.45 frequency ISM band. The CPW patch antenna as a harvester antenna…

Light Emitting Diode (LED) lamps are used as a replacement of “old-fashioned” or incandescent lighting sources, as they reduce the amount of energy consumed. As a side-effect of more efficient energy usage they produce electrical noise. This noise reduces the efficiency of information signal transfer when Power Line Communications (PLC) are used. This study focuses…

The paper a cubic spline built through a local base spline and the local interpolation bicubic spline models we offer have been selected. The construction details of the models are given, the two-dimensional local interpolation bicubic spline models considered in this study provide high accuracy in digital processing of signals, which helps experts to make…

The Internet of Things (IoT) is a technology that enables communication between everyday life using different sensor actuators that work together to identify, capture, and distribute critical data from the planet. Massive machines and devices are therefore linked and communicate with them. The use of resources in this area presents new challenges for this technology.…

The effect of the moving dispersive conducting complex scatterer on the scattering of incident H-wave is investigated herein. In this research, a simulation shows how the scattered phase and magnitude of a moving (rotating and translating) circular cylinder with higher conductivity, made of dispersive material, is affected in the case of incident H-wave (TE-mode) polarization.…

The paper is devoted to the presentation of a new methodological approach (new philosophy) to the formulation and solution of directed search and synthesis of electromechanical objects for a given function problems. The object under the study is a class of electrical machines and electromechanical devices which operation is carried out with a variable structure…

The phenomenon of magnetic fields is affected depending on the polarity, the positive and negative poles will give a response of attraction and repulsion that can be easily observed. Being also important as an educational element where the theory materializes and is observed, which enriches all science. The objective of this work is to create…

This paper presents a design optimization of a dual-band branch-line coupler with stepped-impedance-stub lines. This coupler operates over 5G NR frequency bands n5 and n2, developed by 3GPP for the 5G (fifth generation) mobile network, and these two bands are centered at 0.85 GHz and 1.9 GHz respectively. To achieve the design specifications an adjusted…

This research makes the improvement of the errors surrounding edges and corners of thin electromagnetic regions by means of the magnetic field finite element formulation. Classical thin shell electromagnetic models are usually replaced by impedance-type interface conditions throughout surfaces that ignore errors in the calculation of the local fields (magnetic vector potentials, magnetic fields, eddy…

This paper presents the use of Electromagnetic simulation tools such as ADS and CST in order to practice designing the RF front-end transceiver for a continuous-wave radar. Teaching the microwave engineering course based on the conventional education methods results in students who may not be able to apply their theoretical knowledge to design the microwave…

This paper proposes Halbach array PM linear generators for direct conversion of ocean or sea wave energy. This generator is proposed to be directly coupled to a reciprocating wave energy system which may be a valued alternative for pneumatic and hydraulic systems. In this research, air-cored permanent magnet PM linear generator has been optimally designed…

In this paper, a frequency-tunable antenna is proposed based on a previous antenna which has a ladder shape and a size of 120 x 50 mm2. It is fed using a coaxial cable and it is operational at 700 MHz which is in the UHF band with a bandwidth of 30 MHz. Varactors, having a…

Birefringence is a known property of anisotropic media where incidence of a single propagating wave on a biaxial boundary gives rise to what scientists refer to as an ordinary wave and extraordinary wave. This article explores the anisotropic electromagnetic theory that gives rise to the phenomenon of birefringence focusing on both ordinary and extraordinary plane…

The purpose of this work is to present new technology in acquiring energy from the compact fluorescent lamp (CFL) and store it in a super-capacitor to operate the emergency exit lights. Many studies show energy-efficient light bulbs may emit harmful radiation. This type of lamp emits high levels of radiation, causing migraine headaches, fatigue, and…