Search Results

Combinatorial optimization is an area of great importance since many of the real-world problems have discrete parameters which are part of the objective function to be optimized. Development of combinatorial optimization algorithms is guided by the empirical study of the candidate ideas and their performance over a wide range of settings or scenarios to infer…

This paper proposes the modeling and control of a Solid-State Transformer using a three-stage conversion topology. First, a rectification stage is used, where a three-phase high-voltage AC signal is converted to a DC level; this stage is then followed by a DC-DC converter, and finally an inverter is used to convert the DC into a…

Over the years, wind loading codes has been a crucial tool in determining design wind loads on buildings. Due to the limitations of these codes especially in height, wind tunnel testing is recommended as the best approach in predicting wind flow around buildings but carrying out wind tunnel testing in the preliminary as well as…

Described herein is a general-purpose software engineering architecture for autonomous, computer controlled opponent implementation in modern maneuver warfare simulation and training. The implementation has been developed, refined, and tested in the user crucible for several years. The approach represents a hybrid application of various well-known AI techniques, including domain modeling, agent modeling, and object-oriented programming.…

New multimedia applications such as mobile video, high-quality Internet video or digital television requires high-performance encoding of video signals to meet technical constraints such as runtime, bandwidth or latency. Video coding standard h.265 HEVC (High Efficiency Video Coding) was developed by JCT-VC to replace the MPEG-2, MPEG-4 and h.264 codecs and to respond to these…

In crowdsourcing, selecting the person with suitable expertise is very important; especially since the task requester is not always in direct contact with the worker. Recently, this has become increasingly important particularly when the crowdsourced tasks are complex and require skillful workers (e.g. software development, software testing, vulnerability discovery, and open innovation). In this paper,…

Speaking about the commutation’s equipment, it can be said that the best solution in increasing reliability and lowering the maintenance costs is a continuous monitoring of the equipment. However, if the price/quality ratio is considered, it is obvious that, for the moment, the diagnosis can be also an acceptable solution. Nowadays the predictive maintenance for…

In Computer Aided Diagnosis (CAD) tools, vertebra localization and detection are the essential steps for the diagnosis of cervical spine injuries. The accurate localization leads to accurate treatment, which is more challenging in case of poor contrast and noisy radiographs. This paper targets c-spine radiographs for the localization of vertebra using different vertebra templates, vertebra…

The matters regarding speech signal processing and analyzing in terms of emotional states recognition were presented in this paper. An experiment was conducted to perform both objective and subjective emotional states recognition tests for Polish language.

The increased motivation (by service providers) to offer user-centric and seamless communication services – that satisfies users’ quality of experience (QoE), has manifested a myriad of challenges in the field of wireless communication; and given the increased traffic capacity and sudden explosion of cellular devices, communication systems are constantly threatened by performance related issues –…

Radiation hardened devices are mostly extremely expensive. The continuously downscaling of microelectronic structures and the unavoidable presence of particle radiation on ground and in space leads to unwanted failures in electronic devices. Furthermore it is expected that in the next few years around 8000 new satellites will be launched around the world. Due to the…

Education is the raising of the thinking process and developing the mind in a broader perspective. However, education that is comprehensive and appropriate to the individual according to its potential, ability and skill is too hardest to describe. Thus, matching and referral institutions, including education model that suits the person’s behavior has been receiving attention.…

When two robot systems can share understanding using any agreed knowledge, within the constraints of the system’s communication protocol, the approach may lead to a common improvement. This has persuaded numerous new research inquiries in human-robot collaboration. We have built up a framework prepared to do independent following and performing table-best protest object manipulation with…

This paper proposed an Optical Markup Recognition (OMR) system to be used to detect shaded options of students after MCQ-type examinations. The designed system employed the pixel-based unsupervised classification approach with image pre-processing strategies and compared its efficiencies, in terms of speed and accuracy, with object-based supervised or unsupervised classification OMR systems. Speed and accuracy…

In this paper, Constant False Alarm Rate (CFAR) detection of spatially distributed targets embedded in compound Gaussian clutter with Inverse Gamma texture is addressed. By taking into account the fact that clutter parameters are unknown in practical situations, we propose mean level based on Lookup Tables detectors, that operate as a two-step approach, which consists…

The For the last three decades, end-to-end computing paradigms, such as MPI (Message Passing Interface), RPC (Remote Procedure Call) and RMI (Remote Method Invocation), have been the de facto paradigms for distributed and parallel programming. Despite of the successes, applications built using these paradigms suffer due to the proportionality factor of crash in the application…

Listening to auditory stimuli during study can give positive and negative influence on human cognitive processing. Thus, it has attracted researchers to conduct studies using various types of auditory stimuli. Some researchers believe that Mozart music and white noise are able to give positive influence on cognitive performance. However, most of the past studies gave…

Multi-attribute reverse auction is widely used for the procurements of enterprises or governments. To overcome the difficulty of identifying bidding attribute weight and score function of the buyer, the multi-round auction and bidding models with multiple winners are established based on fuzzy data envelopment analysis. The winner determination model of the buyer considers the integrated…

In this paper we propose our genetic algorithm for solving the SAT problem. We introduce various crossover and mutation techniques and then make a comparative analysis between them in order to find out which techniques are the best suited for solving a SAT instance. Before the genetic algorithm is applied to an instance it is…

In-elastic recovery behavior of seamless tube material has been investigated by uniaxial tensile tests. Unloading Stress–Strain curves obtained under different passes of cold drawing process shows that the percentage of in-elastic recovery to the total recovery increased with plastic deformation. This paper is an experimental study that shows Young’s Modulus decreases with plastic strain for…

Line start permanent magnet synchronous motor (LSPMSM) is one of the highest efficiency motors due to no rotor copper loss at synchronous speed and self-starting. LSPMSM has torque characteristics of both induction motor IM and Permanent Magnet Synchronous Motor-PMSM. Using Genetic Algorithm (GA) for balancing magnetic cost and for copper loss minimization, the magnetic sizes…

Study the content of images is considered an important topic in which reasonable and accurate analysis of images are generated. Recently image analysis becomes a vital field because of huge number of images transferred via transmission media in our daily life. These crowded media with images lead to highlight in research area of image analysis.…

Conformal metalization on mold compound offers new possibility for IC package design to improve features such as rigidization of the flexible core, heat sink capability, 3D-circuit patterning and the electromagnetic interference (EMI) shielding. With the unique processes, the fabrication technology had enabled to achieve the high reliable performance and had passed the electrical test. Following…

A3S(Arwin-Adang-Aciek-Sembiring) is a method of information fusion at a single observation and OMA3S(Observation Multi-time A3S) is a method of information fusion for time-series data. This paper proposes OMA3S-based Cognitive Artificial-Intelligence method for interpreting Transformer Condition, which is calculated based on maintenance data from Indonesia National Electric Company (PLN). First, the proposed method is tested using…

For the design of Information and Communications Technology (ICT) related products, basic level of technical expertise and simple development tools were enough in the early 1980s. As time goes by, new generation products designed by engineers are always expected to be smaller, lighter and faster, due to the increasing global competition and the application of…