Search Results

Nigeria has one of the highest deforestation rates in the world, due mainly to felling of trees for fuelwood and charcoal production. This challenge could be managed if agricultural waste briquettes are used to augment the fuelwood demand for cooking energy provisioning. Energy density of biomass fuels can be raised by blending with coal, but…

Although the perception of Environmental Kuznets Curve (EKC) has been thoroughly investigated, but there is inconsistency in the results. The relationship between nitrous oxide (N2O) emissions, financial development, economic growth, foreign direct investment, and electric power consumption in Bahrain over the period 1980 – 2012 is examined in this paper. The autoregressive distributed lags (ARDL)…

NOX and SO2 gas pollution have a direct impact on health problems and environmental damage. Therefore, to map the emission patterns and predict the resulting impacts, complete data and information on emissions of the two pollutants are needed. In Indonesia, data on NOX and SO2 emissions that are recorded over a long period of time…

This paper covers the study of high-frequency (~ 1 GHz) ZnO piezoelectric transducer integrated on a silicon substrate able to generate both compressional and shear acoustic waves. First, to promote the longitudinal mode, an electrical matching of the transducer in this high-frequency range is effectuated. Second, to promote shear waves, new deposition conditions were applied,…

A new method of analysis and classification of rock acoustic emission signals is proposed. It is based on symbol description of signals and involves the following processing. First, signal segments containing pulses are detected. Second, noise of the detected pulses is reduced by the wavelet filtration method. Fourth-order symlets and adaptive threshold scheme based on…

The solar photovoltaic (PV) power generation industry has experienced substantial, ongoing growth over the past decades as a clean, cost-effective energy source. As electric grids use ever-larger proportions of solar PV, the technology’s inherent variability—primarily due to clouds—poses a challenge to maintaining grid stability. This is especially true for geographically dense, electrically isolated grids common…

The increase electricity production based on renewable energies sources responds to the requirements of sustainable development. In recent years, the investment in the wind energy sector has increased to satisfy green electricity generation and environment protection. Wind energy is currently the most competitive energy resource that is part of the world’s countries views on the…

In this research paper, a technical and economic-environmental study was developed to investigate the possibility of establishing various hybrid power systems with different operation modes. Grid-connected and standalone hybrid systems (solar-wind with storage batteries and diesel generators) have been realized in order to carry out a comparative analysis study of two configurations. These systems have…

While it is commonly accepted that climate change needs to be addressed to protect both human and environmental health, it is not widely understood what steps need to be taken to accomplish this daunting task. Additionally, there is currently no formal definition of what constitutes a ‘green’ company or ‘green’ best practice, despite the rising…

Researchers have associated agriculture and food processing with adverse environmental impacts like; falls in the underground freshwater table, energy consumption, and high carbon emission. These factors have the worst effect on developing countries. Therefore, there is a need for on-demand food production techniques that require minimum resource utilization. For these reasons, scientists are now focusing…

This paper reports on the successful deposition of amorphous carbon nitride thin films (a-CNx). Samples were deposited using a DC-pulsed sputtering technique in CH3CH2OH-N2 atmosphere at constant pressure (1 Torr). Raman spectra were collected to investigate the bonding structure of the deposed thin films, while scanning electron microscopy (SEM) and atomic force microscopy (AFM) were…

It is widely known that cities now house more than half of the world’s population. Within this framework, this study presents the possibilities for real-world application of renewable energy sources (RES) in urban areas, as well as their contribution to the urban deployment of the new energy paradigm. A comparison is made between hybrid power…

Municipal Solid Waste Management (MSWM) decentralisation brings about reductions in the amount of municipal solid waste (MSW) earmarked for landfilling worse still under situations where MSW is being sent to dumpsites. It also reduces the distances MSW collection vehicles travel during MSW collection, maintenance and transport costs due to the establishment of local level decentralised…

The suitability of incorporating waste transfer stations (WTS) in likely future Municipal Solid Waste Management (MSWM) systems for Harare city and neighbouring urban centres was assessed under this study. WTS will bring about location of landfills and other MSWM facilities further away from population centres, increasing recycling, reducing waste collection costs and burden on the…

Before the COVID-19 crisis, the Southern African Developing Countries (SADC) had a varied energy mix including renewable energy, fossil fuels, and military energy production. The use of fossil fuels in the energy mix is known to be the source of the growing levels of greenhouse gases in the atmosphere. However, there was a reduction in…

Fossil fuel can no longer supply the constantly spiking demands of energy around the world, hence the increasing research on renewable energies as an alternative. The Stirling Engine is an external combustion engine, giving us a wide range of heat sources: solar, nuclear. The Stirling engine makes best of use of solar sources in an…

The Additive Manufacturing (AM) technology is a disruptive and novel technique that changes the paradigm of manufacturing methodology. It is based on the principle of having 3D parts by adding simple 2D layers on and on. Before AM was implemented, the conventional subtractive and chip-away techniques such as milling and turning processes had been used…

Artificial Intelligence (AI) is a promising trend in ship energy management systems (EMS). The motivations of this work are designing and implementation of an intelligent energy management system for ship’s electric power system based on an adaptive Neuro-Fuzzy Inference System (ANFIS) and the ship power source is an environmental friend system consists of proton exchange…

In the phosphate industry, sulfuric acid is a key compound in phosphoric acid and fertilizer production. Industrially, the sulfuric acid H2SO4 is made generally in a sequence of three main steps: burning liquid sulfur with air, catalytic oxidation of sulfur dioxide SO2 to sulfur trioxide SO3, and formation of H2SO4 by the reaction of H2O…

Atmospheric pressure plasma was used to treat polypropylene (PP) surfaces. Optical emission spectroscopy (OES) was used to determine the chemical species formed in the plasma as well as the electron temperature and density of the plasma. The flux of species (O and OH) produced during the plasma treatment interact with the polymer surface creating polar…

Connected and self-driving cars have emerged over the last decade as a leading example of cyber-physical systems, which seek to considerably enhance traffic safety, reduce emissions, decrease costs, and improve efficiency. Google, TESLA, Uber ATG are becoming pioneers in the autonomous vehicles industry. Autonomous vehicles can have a large codebase and with a large volume…

A data analytic approach presented in this work covers both data descriptive and predictive modeling with two main objectives: (1) discovering factors related to longevity of populations in the two most populated nations, China and India, and (2) generating life expectancy predictive models for both countries. Descriptive modeling methods to explore major environmental and economic…

The advent of electric vehicles has changed the face of the automobile industry. The drive system properties of vehicles such as eBikes or electric cars differ fundamentally from those of a diesel engine. The lack of a conventional internal combustion engine has made the vehicles considerably silent. Nevertheless, previously hidden sources of vibration and noise…

Prior to the 19th century discovery of Portland Cement (PC), Lime Based Mortar remained popular due to its flexibility, permeability and more importantly, associated low carbon emissions. However, lime’s characteristic delayed setting/hardening time, low mechanical strength, poor internal cohesion and some volumetric changes have overshadowed significance of its outstanding features particularly, flexibility, and consequently put…

Nowadays the buildings sector is one of the key sectors to achieve sustainability, with the correspondent consumers, in particular, the household consumers, having the need to perform sustainable choices every day, regarding the appliances to be acquired from the market. This is not only due to government’s growing concerns about sustainability but also with the…