Results (20)
Search Parameters:
Keyword: transmitterLight Modulation Enhancement by using an Impedance Matching Scheme for a Subcarrier Multiplexed Light Transmitter
We propose and analyze new impedance matching schemes to enhance applied voltage to an optical modulator and light modulation for a subcarrier multiplexed light transmitter or a radio-on-fiber transmitter that carries radio-frequency signal through an optical fiber. Our proposal includes two methods using a quarter-wavelength impedance transformer and a tapered microstrip line for impedance matching…
Read MoreOptimization of Multi-standard Transmitter Architecture Using Single-Double Conversion Technique Used for Rescue Operations
A new architecture of multi-standard transmitter that combines single and double frequency conversion is presented. The transmitter is able to generate waveforms of different cellular standards (GSM, UMTS, Wimax), LAN standards (Bluetooth, Zigbee, IEEE802.11 b/g) and Radio navigation standards (GPS, Galileo) as well. Depending on the selected standard and frequency, the transmitter routes the intermediate…
Read MoreTransmission of the CAP Protocol through the ISDB-T Standard
Early warning systems have had a significant impact on society by providing timely information to mitigate the effects of natural disasters. To enhance early warning capabilities, researchers are exploring the use of digital terrestrial television systems to broadcast alerts across large urban and rural areas. In this research project, the aim is to integrate the…
Read MoreAccuracy Improvement-Based Wireless Sensor Estimation Technique with Machine Learning Algorithms for Volume Estimation on the Sealed Box
Currently, the quality and quantity of product must be inspected before transporting. Currently the popular unsealing box product inspecting is performed by weighing the box where the errors occur according to the tolerance of the weighting machine and tolerance weight of the product. On the other hand, the quantity of product can be inspected automatically…
Read MoreAntenna System Design To Increase Power Transfer Efficiency with NFC Wireless Charging Technology
The NFC wireless charging feature is an extension of the NFC technology that can be implanted on wearables. The purpose of this paper is to show how to increase power transfer efficiency on both transmitter and receiver antenna systems. To demonstrate this problematic, firstly this paper gives an overview of how this NFC feature is…
Read MoreEnhanced Data Transportation in Remote Locations Using UAV Aided Edge Computing
In recent years, the applications in the field of Unmanned Aerial Vehicle (UAV) systems has procured research interests among various communities. One of the primary factors being, thinking beyond the box of what could UAV system bring to the table other than military applications? Evidence to any answer for this question is the current day…
Read MoreInfrared Uplink Implementation for Software Defined Visible Light Communication Systems
The main advantage of software-defined visible light communication (VLC) systems is that they allow us to reuse modulation, coding, synchronization and medium access techniques used in conventional radio systems. This article focuses on the implementation of an uplink alternative using an infrared (IR) light communication system. For this goal, analog front-ends are designed and implemented.…
Read MoreAnalysis of Security-Reliability Trade-off for Multi-hop Cognitive Relaying Protocol with TAS/SC Technique
This paper studies a trade-off between security (intercept probability (IP)) and reliability (outage probability (OP)) for a multi-hop decode-and-forward (DF) relaying protocol in an underlay cognitive radio network, in presence of a multi-antenna eavesdropper. In the considered protocol, all primary and secondary terminals are equipped with multiple antennas, and they employ transmit antenna selection (TAS)…
Read MoreBilateral Communication Device for Deaf-Mute and Normal People
Communication is a bilateral process and being understood by the person you are talking to is a must. Without the ability to talk nor hear, a person would endure such handicap. Given that hearing and speech are missing, many have ventured to open new communication methods for them through sign language. This bilateral communication device…
Read MorePerformance Analysis of Joint Precoding and Equalization Design with Shared Redundancy for Imperfect CSI MIMO Systems
Analytical researches on a potential performance of multipath multiple-input multiple-output (MIMO) systems inspire the development of new technologies that decompose a MIMO channel into independent sub-channels on the condition of constrained transmit power. Moreover, in current studies of inter-symbol interference (ISI) MIMO systems, there is an assumption that channel state information (CSI) at receivers and/or…
Read MoreA Simple Modelling Tool for Fast Combined Simulation of Interconnections, Inter-Symbol Interference and Equalization in High-Speed Serial Interfaces for Chip-to-Chip Communications
We describe an efficient system-level simulator that, starting from the architecture of a well-specified transmissive medium (a channel modelled as single-ended or coupled differential microstrips plus cables) and including the system-level characteristics of transmitter and receiver (voltage swing, impedance, etc.), computes the eye diagram and the bit-error rate that is obtained in high-speed serial interfaces.…
Read MoreA Balanced RF Power Amplifier using the Improvement 3-dB Quadrature Hybrid Couplers for Mitigation of the Reverse Intermodulation in FM Broadcasting Systems
FM broadcast stations generate reverse intermodulation signals that cause communication problems between ATC controllers and pilots in the Air Traffic Control systems (ATC) in Thailand. In this paper proposes a balanced RF power amplifier using the improvement 3-dB quadrature hybrid couplers to reduce the reverse intermodulation of FM broadcasting systems. The mathematics analysis of the…
Read MoreA Comprehensive Review on the Feasibility and Challenges of Millimeter Wave in Emerging 5G Mobile Communication
This article presents a comprehensive review on the feasibility and challenges of millimeter wave in emerging fifth generation (5G) mobile communication. 5G, a multi-gigabit wireless network is the next generation wireless communication network. The mmWave cellular system which operates in the 30-300 GHz band has been proposed for use as the propagation channel. Its large…
Read MoreA Cyber-Vigilance System for Anti-Terrorist Drives Based on an Unmanned Aerial Vehicular Networking Signal Jammer for Specific Territorial Security
During sudden anti-terrorist drives conducted by the law enforcement agencies, a localized cyber security system happens to be a special tactic to avert the unprecedented massacre and gruesome fatalities against the residents of that area by disconnecting the affected territory from the rest of the world; so that the militants and their outside accomplices cannot…
Read MoreEfficient Limited Feedback Technique for FDD MIMO Systems
In this paper an efficient feedback quantization technic for beamforming in MIMO systems is presented. The proposed technic named time domain quantization TD-Q is based on the feedback of time domain parameters necessary for the reproduction of the beamforming matrix at the transmitter. This TD-Q presents the same performance than the conventional Givens rotation quantization…
Read MoreEnhanced Outdoor to Indoor Propagation Models and Impact of Different Ray Tracing Approaches at Higher Frequencies
The main target of this article is to study the provision of indoor service (coverage) using outdoor base station at higher frequencies i.e. 10 GHz, 30 GHz and 60 GHz. In an outdoor to indoor propagation, an angular wall loss model is used in the General Building Penetration (GBP) model for estimating the additional loss…
Read MoreInterference Avoidance using Spatial Modulation based Location Aware Beamforming in Cognitive Radio IOT Systems
The Internet of Things (IOT) is a revolutionary communication technology which enables numerous heterogeneous objects to be inter-connected. In such a wireless system, interference management between the operating devices is an important challenge. Cognitive Radio (CR) seems to be a promising enabler transmission technology for the 5G-IOT system. The “sense-and-adapt” smart transmission strategy in CR…
Read MoreAnalysis of Outdoor and Indoor Propagation at 15 GHz and Millimeter Wave Frequencies in Microcellular Environment
The main target of this article is to perform the multidimensional analysis of multipath propagation in an indoor and outdoor environment at higher frequencies i.e. 15 GHz, 28 GHz and 60 GHz, using “sAGA” a 3D ray tracing tool. A real world outdoor Line of Sight (LOS) microcellular environment from the Yokusuka city of Japan…
Read MoreDesign and Construction of a remote control switching device for household appliances application
Remote control switching device for household application is a home device used to control the switching of household appliances from a distance. It serves to make the switching of household appliances easy for the elderly, physically challenged, the young and anyone who, in any circumstance, needs comfort and security. This paper develops a remote control…
Read MoreMIMO Performance and Decoupling Network: Analysis of Uniform Rectangular array Using Correlated-Based Stochastic Models
We explore the dependency of MIMO performance on azimuthal spread (AS) and elevation spread (ES) using correlated-based stochastic models (CBSMs). We represent the transmitter as uniform rectangular array (URA), and derive an analytical function for spatial correlation, in terms of maximum power when phase gradient of the incident wave follows a Student’s t-distribution. We model…
Read More
