Results (362)
Search Parameters:
Keyword: SimulationPriority Incorporated Zone Based Distributed Clustering Algorithm for Heterogeneous Wireless Sensor Network
Wireless sensor networks (WSNs) are considered to be the currently flourishing scientific domain, thereby found to be applicable in numerous industrial and domestic applications. As per the mathematical results in Pulse-coupled oscillator (PCO), it has been predicted that, numerous iterations are needed for convergence, leading to increased power consumption. Biologically inspired solutions are greatly applicable…
Read MoreDFIG Defects Diagnosis Method for Wind Energy Conversion Chain
This paper is an extension of research work originally presented in 2018 IEEE fifth International Congress on Information Science and Technology (CiSt). The research consists on developing method to diagnose electrical defects affecting wind turbine doubly-fed induction generator DFIG which constitutes a crucial part of wind energy conversion chain. First off all, we create a…
Read MorepH Neutralization Process Control based on Active Disturbance Rejection Control
This paper considers active disturbance rejection control (ADRC) as a new control approach for pH neutralization process. The pH process is challenging to control due to its sensitivity to disturbance, nonlinear dynamics, and time-varying characteristics. Special attention is paid to the impact of disturbances typically exists in the chemical process. First, the pH neutralization process…
Read MoreAssessment of the Quality and Sustainability Implications of FIFO and LIFO Inventory Policies through System Dynamics
Perishable inventory management contributes simultaneously to society and the economy, by reducing food wastage and capitalizing on the freshness of goods. For this reason, countless mathematical models have been developed for their effectiveness and cost-efficient management. Yet, the majority of these models can only optimize systems for a limited time frame, allowing for small gains…
Read MoreA Lightweight, Hardware-Based Support for Isolation in Mixed-Criticality Network-on-Chip Architectures
Spatial and temporal isolation is a crucial issue in embedded systems executing multiple tasks with several levels of criticality. This is considerably significant in the context of multi-processor (or multi-core) embedded systems running multiple mixed-criticality applications in parallel. This work deals with the issue of isolation of different application classes on Network on Chip (NoC)…
Read MoreEvaluation of the Effects of Bidding Strategy with Customized Pricing on the Individual Prosumer in a Local Energy Market
Peer-to-peer (P2P) energy trading is a mechanism that allows people to share locally the energy they have generated from distributed renewable resources (DER), to generate profit form the unused resources and to reduce the cost for electricity for the household and in the community itself. This calls for the design of new energy markets, accompanied…
Read MoreA Novel Strategy For Prompt Small Cell Deployment In Heterogeneous Networks
Popularity and a_ordability of smart phones and other data hungry devices add exponentially to the tra_c demand of existing cellular networks. Cell densification and small cell deployment over existing macrocell has been identified as an e_ective solution to high tra_c demand predicted for future wireless networks like 5G. Small cells are deployed over existing macrocells…
Read MoreEvent Monitoring using Distributed Pattern Recognition Approach on Integrated IoT-Blockchain Network
With the advancement in the field of Internet-of-Things (IoT), event monitoring applications have rapidly evolved from a simple event data acquisition towards predictive event analytics involving multi-sensory data aggregation in a distributed environment. Existing event monitoring schemes are mainly relying on ine_cient centralized processing mechanism, which may lead to the common single-point of failure for…
Read MoreModel-Driven Engineering Infrastructure and Tool Support for Petrochemical Industry Automation
The definition of equipment and components of physical plants is a necessary step towards the development of simulation, control, and supervisory applications for the petrochemical industry. Often it happens that the same plant/equipment is (re)modeled on each application, causing a waste-oftime on repetitive (re)design, besides introducing potential inconsistencies between the models. Moreover, even though each…
Read MoreInference Rule of Collision Risk Index based on Ship Near-Collision via Adaptive Neuro Fuzzy Inference System
Collision risk index has been studied as the required quantitative values for decision-making of collision avoidance between ships. Recently, inference methods of the collision risk were proposed on the basis of the fuzzy theory because of being possible to collect data in real time. Existing fuzzy inference system was composed of only simulation results using…
Read MoreMulti-Restricted Area Avoidance Scenario Using Hybrid Dynamical Model and Its Predictive Controller
This article is addressed to show the results of hybrid dynamical modeling in the form of PWA (piecewise-affine) and equivalent MLD (mixed-logical dynamical) model for multi-restricted areas avoidance of an autonomous system. It is a problem of determining the optimal moving trajectory from plant’s initial position to some desired position while avoiding some restricted areas…
Read MoreOptimal Discrete-time Sliding Mode Control for Nonlinear Systems Subject to Input Constraints
In this paper, an optimal discrete-time sliding mode control is proposed for single-input single-output nonlinear systems with input constraints. The sliding surface is designed on the basis of particle swarm optimization algorithm in order to optimize the system response characteristics while ensuring the follow-up of reference model in presence of constraints. Moreover, the controller is…
Read MoreExperimental Evaluation of Transmission between Two XBee Modules Using Radio-over-Fiber Technique
An experimental transmission between two XBee modules using Radio over Fiber technique is demonstrated. Data issued from an XBee module coded on a wireless microwave carrier at 2.44GHz is transmitted through an optical link of 25.24 km. The optical transmission is based on an external modulation scheme over a dispersive channel. Frequency response of the…
Read MoreAll-Pass RC-Filters Architecture with Independent Adjustment of the Main Parameters Based on Differential Difference Amplifiers
We have suggested an architecture of the second-order all-pass active RC-filter (ARCF), based on three differential difference amplifiers (DDA’s), which provides full set of amplitude-frequency responses (AFR’s) (low pass filter (LPF), high pass filter (HPF), band pass filter (BPF), rejection filter (RF)). We have given the basic equations, which allow ARCF’s. The results of computer…
Read MorePerformance Analysis of Thyristors Switched Capacitors used for Reactive Power Compensation of Induction Motor
This paper analyzes the process of reactive power compensation using thyristors switched capacitors TSC topology based on multiterminal switch during the starting of induction motor. The paper explains the control principle of this TSC topology which depends on the multiterminal switch. To actively track the required reactive power for the dynamic load and to perfectly…
Read MorePermutation Methods for Chow Test Analysis an Alternative for Detecting Structural Break in Linear Models
This study examined the performance of two proposed permutation methods for Chow test analysis and the Milek permutation method for testing structural break in linear models. The proposed permutation methods are: (1) permute object of dependent variable and (2) permute object of the predicted dependent variable. Simulation from gamma distribution and standard normal distribution were…
Read MoreEnergy Consumption Evaluation of Air Cooled Chiller With Cold Storage System Powered by Photovoltaic Modules
Renewable energy becomes an appealing technology used in many applications in our life. Environmentally, it reduces CO2 emissions and enhances the sustainability of the system. This paper study the benefits of using a photovoltaic system with a thermal storage tank to power air-cooled chiller, in two different scenarios. The simulation methodology is adopted in this…
Read MoreMulti-Band Hand of God Antenna with Functionality Variation with Use of Slots and Feed Position
This article investigates different versions of a new multi-band micro-strip antenna design. NASA inspired the antenna design from “Hand of God” galaxy discovery. A multi-band operation between 0.15 and 8 [GHz] is obtained and captures up to 10 frequency bands. The antenna has a small area of 4 x 5 cm2 and is printed on…
Read MoreStudy of Performance of Bio- Inspired Strategies Applied to Pursuit Evasion Game Under Feedback Laws
Pursuit Evasion Game (PEG) is an abstract model of various significant problems that appear in both civil and military applications. Bio- Inspired strategies are found to be very useful in studying the PEG. While optimal response to the pursuit strategies are available using geometric control theory, it is shown in this paper that application of…
Read MoreIndoor Positioning and Path Planning Platform for iRobot Create 2 Sweeping Robot
Many robots have been proposed for smart applications in recent years However, while these robots have good ability to move between fixed points separated by short distances, they perform less well when required to navigate complex interior spaces with an irregular layout and multiple obstacles due to their relatively crude positioning and path control capabilities.…
Read MoreAn Adaptive Fuzzy-Sliding Mode Controller for The Bridge Crane
This article presents a bridge crane nonlinear dynamic model in 2-dimensional space, and then given a novel adaptive fuzzy-sliding mode controller based on combining sliding mode control with fuzzy logic and Lyapunov function. Firstly, the article proposes an intermediate variable to link signal between two slide surfaces, related to trolley movement and payload swing. Then…
Read MoreModeling of Grid-Connected Photovoltaic System Installation in Moroccan Ibn Tofail University
The main importance of solar photovoltaic energies research is to meet the many environmental demands of the energy challenge, to maximize power and to reduce the costs of photovoltaic (PV) systems to reply the energy needs of population. In the present research work, the first objective is to study the performance and the output energy…
Read MoreTransfer Function Analysis of Fractional-Order Three-Dimensional Electrically Coupled Cell Network
In this paper, a novel method is proposed for the dynamic analysis of fractional- order three-dimensional electrically coupled cell network. In general, three- dimensional cell network is constructed by combining three one-dimensional circuit networks. Analysis method is based on the principles of the dynamic analysis with transfer function approximation. Although fractional-order three-dimensional circuit network model…
Read MoreDevelopment of Smart Technology for Complex Objects Prediction and Control on the Basis of a Distributed Control System and an Artificial Immune Systems Approach
This paper is an extension of work originally presented in 2018 Global Smart Industry Conference (GloSIC). Researches are devoted to the development of Smart technology for complex objects control and prediction on the basis of a distributed Honeywell DCS control system of the TengizChevroil enterprise using the example of a technological process of medium pressure…
Read MoreNovel Design of Multiband Microstrip Patch Antenna for Wireless Communication
This paper presents a novel six band frequency reconfigurable antenna for 2.4 GHz (Lower Worldwide Interoperability for Microwave Access (WiMAX)), 5.3 GHz (Wireless Local Area Network (WLAN)) and 9.1-10.2 GHz (X-band) frequency bands. The proposed antenna has a compact size of 22mm_30mm at lower resonance of 4.2 GHz and is printed on FR4 material with…
Read More
