Search Results

In densely located loosely coupled wireless charger environments, cross-connection errors can occur when wireless chargers operate at the same time within the same wireless communication range. In this work, an effective algorithm is proposed to prevent cross-connection error. The algorithm based on the cross-connection abatement technique with the received signal strength indicator of out-band BLE…

Almost every cells in human’s body contain the same number of genes so what makes them different is which genes are expressed at any time. Measuring gene expression can be done by measuring the amount of mRNA molecules. However, it is a very expensive and time consuming task. Using computational methods can help biologists to…

In the world today, the rapid development of the Internet of Things (IoT) and the application of the Connected Vehicle Cloud (CVC) as the Internet of Things in the intelligent transportation are becoming widespread. They can improve people’s safety, vehicle security as well as reduce the cost of ownership of an automobile. At the same…

This article discusses IoT security in situations whereby devices do not share the same security domains, which raises security, privacy and safety concerns. It then presents an Access Control and Privacy infrastructure for addressing these concerns in the context of distributed environments. IoT deployments allow billions of connected physical devices to collect, process and share…

A design of elliptical printed dipole antenna based on neural network approach is presented in this paper for recent WiMAX, Bluetooth, WLAN, LTE, and future 5G applications. The dipole patch is printed on top of substrate which has relative permittivity of 2.2 and 0.787mm of thickness. The elliptical dipole antenna is single band and the…

The physically-based environmental model is a crucial tool used in many scientific inquiries. With physical modeling, different models are used to simulate real world phenomena and most environmental scientists use their own devices to execute the models. A complex simulation can be time-consuming with limited computing power. Also, sharing a scientific model with other researchers…

A sequential pre-treatment of demineralization and torrefaction, was carried out on palm empty fruit bunches (EFB). EFB and demineralized EFB (DEFB) were torrefied in a vertical tubular reactor in the temperature range of 200 to 280 °C for 30 mins under nitrogen (flow rate:100 mL/min. The pretreated samples were characterized using proximate and ultimate analyses,…

This paper is an extension of work originally presented in the 19th International Conference on Computer Supported Education and Information Technology. This paper identifies motivational factors that ensure the initiation and effective implementation of mathematical activity. These factors are in subordination to each other, forming a hierarchical dependence. At the heart of this hierarchy is…

In this research paper, the development and evaluating of a smart controller for electrical powered wheelchairs are presented. The controller aimed to assist quadriplegic, paralyzed, and handicap patients who cannot use their hands to drive an electrical wheelchair by using a joystick controller. Two sub control units have been combined in one hybrid system to…

Recently, several studies focus on a GaN material system that exhibits a significant probability of use in power devices including wide-gap semiconductors. However, the GaN-HEMT is also a structure that easily leads to crystal defects in AlGaN and i-GaN heterojunction. The aim of the study involved investigating the cause of the current collapse in GaN-HEMT…

A low-complexity dual-band chirp FSK, direct conversion receiver is described in this paper. The receiver is dedicated to be used in the transceiver unit of a medical implantable wireless sensor. The system uses the RF band between 402 and 405 MHz. Two sub-bands frequencies employing chirped pulses are assigned for both binary information. The novelty…

Screening the abnormal development of the zebrafish embryos before and after being hatched for a large number of samples is always carried out manually. The manual process is presented as a tedious work and low-throughput. The single female fish produce hundreds of eggs in every single mating process, the samples of the zebrafish embryos should…

Requirement for pole-changing motors emerged at the very early times of asynchronous motor design. Different solutions have been elaborated and some of them are generally used. One of these solutions in use is the so called pole phase modulation method. The so called 3 Y / 3 Y pole-changing winding being subject of this paper…

Four different soundscapes with different loudness and spectral distributions were recorded in Zagreb (capital of Croatia) and reproduced to two groups of listeners while they were performing a concentration demanding task – a simplified variation of the memory game. These two groups of test subjects listened to the same soundscapes but with different loudness distribution.…

Multiprocessing can be considered the most characteristic common property of complex digital systems. Due to the more and more complex tasks to be solved for fulfilling often conflicting requirements (cost, speed, energy and communication efficiency, pipelining, parallelism, the number of component processors, etc.), different types of component processors may be required by forming a so…

During microwave heating of materials, the efficiency of microwave heating depends on the materials’ dielectric property, shapes and sizes of the material, materials’ position inside the applicator, operating frequency, level of input power, specific heat capacity, number and position of waveguide over the applicator, size and geometry of applicator etc. This paper examines the effects…

Though AES is the highest secure symmetric cipher at present, many attacks are now effective against AES too which is seen from the review of recent attacks of AES. This paper describes an extended AES algorithm with key sizes of 256, 384 and 512 bits with round numbers of 10, 12 and 14 respectively. Data…

Analysis of magnetic resonant wireless power transfer systems aims to achieve maximum efficiency of the power transfer. From the analysis we wish to derive the maximum power and the frequency at which this occurs. This paper presents a method to estimate these two required values and to achieve this requires the solution of the input…

Memory based ternary physical unclonable functions contain cells with fuzzy states that are exploited to create multiple sources of physical randomness, and design true random numbers generators. A XOR compiler enhances the randomness of the binary data streams generated with such components, while a modulo-3 addition enhances the randomness of the native ternary data streams,…

This study applies systemic functional linguistics (SFL) as complementary framework of analysis of technology acceptance models (TAMs). The purpose is to bridge research methodology language in international business (IB) studies and engineering management science. Currently TAMs and its consolidated version, the Unified Theory of Acceptance and Use of Technology (UTAUT) provides for a typology of…

Data centers’ mission critical nature, significant power consumption, and increasing reliance on them for digital information, have created an urgent need to monitor and adequately manage these facilities. Metrics are a key part of this effort as their indicators raise flags that lead to optimization of resource utilization. A thorough review of existing data center…

In this paper an efficient feedback quantization technic for beamforming in MIMO systems is presented. The proposed technic named time domain quantization TD-Q is based on the feedback of time domain parameters necessary for the reproduction of the beamforming matrix at the transmitter. This TD-Q presents the same performance than the conventional Givens rotation quantization…

The necessity of navigation in people and mobile robots (MR) through specific environments (indoors or outdoors) has become more and more relevant nowadays. For indoors, generally speaking, the positioning systems can be divided into 2D (two dimensions) or 3D (three dimensions) approaches, where Ultrasonic Local Positioning Systems (ULPS) are often a common solution for MRs…

The main target of this article is to study the provision of indoor service (coverage) using outdoor base station at higher frequencies i.e. 10 GHz, 30 GHz and 60 GHz. In an outdoor to indoor propagation, an angular wall loss model is used in the General Building Penetration (GBP) model for estimating the additional loss…

Exploring communities and outliers in Social Network is based on considering of some nodes have overlapped neighbor node within the same group as well as some nodes have no any link to the other node or have no any overlapped value. The existing approaches are based on the overlapping community detection method were only defined…