Search Results

This study presents a novel alternative to traditional Net Energy Metering (NEM) by proposing a set of innovative pricing schemes for solar customers participating in utility-led grid service programs through the aggregation of Distributed Energy Resources (DERs). Grounded in cooperative game theory, the proposed framework facilitates equitable and efficient value allocation among key stakeholders, namely…

The solar photovoltaic (PV) power generation industry has experienced substantial, ongoing growth over the past decades as a clean, cost-effective energy source. As electric grids use ever-larger proportions of solar PV, the technology’s inherent variability—primarily due to clouds—poses a challenge to maintaining grid stability. This is especially true for geographically dense, electrically isolated grids common…

Condition assessment of medium voltage assets is essential to ensure reliability and cost-effective operation of power distribution networks. This article presents a literature review of condition assessment of medium voltage assets related to a distribution system in a non-interconnected zone in Colombia, namely, power transformers, photovoltaic systems, switchgear, lines and cables, and instrument transformers. Advanced…

Due to the variations in weather conditions, photovoltaic systems adopt a technique based on maximum power point tracking to extract the maximal power of the solar module. In the literature, there are many different methods classical and intelligent of maximum power point tracking (MPPT). But, due to the semiconductor effect, the current-voltage characteristics of the…

The current paper focuses on the design of cascade control systems employed in photovoltaic (PV) powered microgrids (MG), which have been well received in remote agricultural farms in Ecuador. The study case is composed of a three-phase inverter powered by a DC-DC converter fed by a PV array and its control system. To simulate the…

Electrifying or connecting remote and isolated communities to the national grid is very difficult and expensive. This challenge is due to the geographic locations of these isolated communities and terrain that needs navigation when installing transmission lines to transmit power to the communities. This article presents a case study of the design of a hybrid…

There are different factors which contribute to the amount of output power which can be delivered by solar photovoltaic (PV) module at any time of the year. The factors include but not limited to solar irradiation, ambient temperature, relative humidity, wind velocity, position of sun in the sky, geographical position of installed solar PV module…

This paper presents novel Energy Management Strategies (EMSs), and the control of a Grid-Connected Hybrid Renewable Energy System (GCHRES). The GCHRES describes a Photovoltaic Generator (PVG) and a Battery-Based Storage System. Both are tied to the Common Coupling Point (CCP) through a reversible three-phase inverter. The CCP combines the Utility Grid (UG) and an AC…

Sustainable energy is gradually becoming the norm today due to greenhouse warming effects; as a result, the quests for different renewable energy sources such as photovoltaic cells as well as energy efficient electrical appliances are becoming popular. Therefore, this article explores the alternative energy case for thermoelectricity with focus on the steady-state mathematics, mixed modelings…

It is widely known that cities now house more than half of the world’s population. Within this framework, this study presents the possibilities for real-world application of renewable energy sources (RES) in urban areas, as well as their contribution to the urban deployment of the new energy paradigm. A comparison is made between hybrid power…

Fossil fuel can no longer supply the constantly spiking demands of energy around the world, hence the increasing research on renewable energies as an alternative. The Stirling Engine is an external combustion engine, giving us a wide range of heat sources: solar, nuclear. The Stirling engine makes best of use of solar sources in an…

To this extent, the delineation of techno-economic evaluations for transformers becomes more intricate through a lens of Distributed Solar Photovoltaic (DSPV) market in South Africa. Essentially, the transformer price and loss evaluation techniques should be tailored for calculating the Total Ownership Cost (TOC) of transformers facilitating decentralized energy systems. In South Africa, the traditional coal…

In this paper, we investigate and analyze parameters degradation in a typical photovoltaic (PV) cell, which lead to power loss under dark as well as light condition using measured current-voltage (I-V) data. A nonlinear least squares method to extract the parameters such as the reverse saturation currents, the ideality factors, the series and shunt resistances…

This manuscript exhibits a perfect design for a flexible number of modified DC nanogrids within an open energy distribution network (OEDN) that interconnected via a DC bus. Each modified nanogrid implies a single-input multi-output switched boost inverter (SIMO-SBI). The DC-output for each inverter is robustly controlled to keep the DC-bus interconnected voltage constant. The proposed…

Solar energy becomes widely used in the global power grid. Therefore, enhancing the accuracy of solar energy predictions is essential for the efficient planning, managing and operating of power systems. To minimize the negatives impacts of photovoltaics on electricity and energy systems, an approach to highly accurate and advanced forecasting is urgently needed. In this…

Sizing optimization should be used to design an efficient, sustainable, and feasible hybrid system. In this paper, a hybrid power plant consisting of an off-grid photovoltaic and wind energy system was planned to supply the demand of residential houses in Libya. To minimize installation and operational costs by sizing each part of the hybrid system,…

This paper proposes a photovoltaic (PV) integrated shunt active power filter (SAPF) for reactive power compensation, uneven loading and compensation of harmonic current. The control of SAPF is implemented by using adaptive based current estimation algorithm to maintain power factor near to unity and source current sinusoidal at source side. The weights are calculated online…

This study examines the potential of solar energy in the urban environment with a case study in Semarang, Indonesia by analyzing the intensity of solar radiation and the residential rooftop area. The study aims to obtain a quantitative description of the potential for electricity production from rooftop solar photovoltaic systems in residential areas and estimate…

Photovoltaic systems and monitoring go hand in hand. There is no better way to check the health of your photovoltaic system than to utilize a remote monitoring system. Monitoring and tracking of photovoltaic systems are crucial for reliable functioning and optimal yield of any solar electric system. This paper aims to introduce a remote electronic…

A control of the greenhouse when it is connected to the photovoltaic generator is described in this paper. The greenhouse is modulated by differential equations while the temperature and humidity are regulated using the fuzzy logic controller. The photovoltaic system can supply maximum power for a specified voltage and output current. In addition, the fuzzy…

High gain-bandwidth product and visible/UV contrast photodetectors are vital in Visible Light Communication (VLC) and Ultraviolet (UV) reflectance imaging applications respectively. We adopt material and structural optimization to perceive such photodetectors with back-illuminated Optical Field Effect Transistor (OPFET) wherein any potential difference in absorption coefficient of the semiconductor material between the visible and the UV…

Peer-to-peer (P2P) energy trading is a mechanism that allows people to share locally the energy they have generated from distributed renewable resources (DER), to generate profit form the unused resources and to reduce the cost for electricity for the household and in the community itself. This calls for the design of new energy markets, accompanied…

Noise defined as ‘a sensation of unwanted intensity of a wave’, is perception of a pollutant and a type of environmental stressor. The unwanted intensity of a wave is a propagation of noise due to transmission of waves (viz. physical agents) such as light, sound, heat, electricity, fluid and fire. The characterization of noise interference,…

Currently the use of distributed energy resources, especially renewable generation, and demand response programs are widely discussed in scientific contexts, since they are a reality in nowadays electricity markets and distribution networks. In order to benefit from these concepts, an efficient energy management system is needed to prevent energy wasting and increase profits. In this…

CdTe-based photovoltaic (PV) cells provide the lowest EBPT (energy payback time) and emit less amount of GHG (green house gases) among different types of PV cells. Thus, it is very essential to enhance the efficiency of CdTe-based solar cells. A high efficiency CdTe/CdS p-i-n heterostructure solar cell is designed and the performance of the cell…