Dysphoria is a state faced when one experienced disappointment. If it is not handled properly, dysphoria may trigger acute stress, anxiety and depression. Typically, the individual who experienced dysphoria are in-denial because dysphoria is always being associated with negative connotations such as incompetency to handle pressure, weak personality and lack of will power. To date,…

The IEEE 802.11n wireless local-area network (WLAN) has been extensively deployed around the world due to the flexibility, lower cost, and the high-speed data transmission capability at 2.4 GHz ISM band. However, in the WLAN deployment, one key challenge is to optimize the channel assignment of access-points (APs) under the small number of partially overlapping…

Tactile displays are widely used in the rehabilitation and education of blind persons, as it is one of the media of communication amongst them. Tactile display performance is measured in terms of accuracy in presenting pattern, accuracy in identification, recognition and reading time of presented pattern. However, it has had meager attention from researchers. This…

This paper proposes a computationally intelligent algorithm for extracting relevant features from a training set. An optimal subset of features is extracted from training examples of network intrusion datasets. The Support Vector Machine (SVM) algorithm is used as the cost function within the thermal equilibrium loop of the Simulated Annealing (SA) algorithm. The proposed fusion…

This article investigates different versions of a new multi-band micro-strip antenna design. NASA inspired the antenna design from “Hand of God” galaxy discovery. A multi-band operation between 0.15 and 8 [GHz] is obtained and captures up to 10 frequency bands. The antenna has a small area of 4 x 5 cm2 and is printed on…

Photoluminescence (PL) of inhomogeneous porous silicon (PS) of p-type is investigated in this contribution. We measured the PL signal at equidistant positions separated by 0.05 mm in area localized between original crystalline Si (c-Si) wafer surface and electrochemically prepared PS layer. Two PL peaks localized at energies 1.8 and 1.9 eV were identified and their…

This study is the extension of the previous study about “Traffic Service Quantitative Analysis Method under Developing Country” in 2018 International Conference on Advances in Computing, Communications and Informatics (ICACCI). In the previous study, it is introduced how to make quantitative calculation for traffic congestion by traffic parameters and its characteristics curve such as traffic…

The task of fuzzy mathematical modeling of the composition of a polymer composition is singled out and formulated, as one of the types of chemical-technological systems for creating the theoretical foundations for managing the physicochemical properties of the material produced from this composition. Fuzzy data on the technical functions and concentration of individual ingredients that…

A new microstrip patch antenna for ultra-wideband applications is presented in this paper. The design and performance of the antenna component are discussed. The propounded antenna is mounted on a compact FR-4 substrate having dimensions 20 x 30 x 1.6 mm3 with relative permittivity εr=4.3. The rectangular patch antenna is slotted with two types; rectangular…

The purpose of this paper is to improve the thermographic method for detection the places of heat energy losses on the urban underground thermal pipelines using the computer system. This goal was achieved by building a heat map of the surveyed heating main with data layering directly on a computer map of the area, which…

Wireless communication opens up new avenues in the field of intelligent vehicle systems, including monitoring, guidance and warning applications. In order to determine more precisely the feasibility of using the 802.11n standard in vehicular communication systems, this paper describes a process for evaluating the propagation performance of the 802.11n and 802.11p standards. To do that,…

We have already succeeded in findings that stereoscopic video clips enhance brain activity. We herein increase the knowledge about the influence of 3D and blurred images on the human body, especially on brain activity. From of old, it has been pointed out that the motion sickness is induced by the blurred images. In this study,…

The distribution of bit patterns is an important measure to check the randomness of a sequence. The authors of this paper observed this crucial property in a binary sequence which generated by using a primitive polynomial, trace function, and Legendre symbol defined over the sub extension field. The authors create a new dimension in the…

Noise control is essential when applying speech recognition in noisy environments such as factories. In this study, a signal processing for noise cancellation is proposed by using a noise-insensitive bone-conducted speech signal together with an air-conducted speech signal. The speech signal is generally expressed by a nonlinear model. The extended Kalman filter is very famous…

Music genre classification is an important multimedia research domain, including aspects of music piece representation, distances between genres, and categorization of music databases. The objective of this study was to develop a model for automatic classification of musical genres from audio data by using features from low-level time and frequency domains. These features can highlight…

The aim of this paper is to develop the educational domain management knowledge content identification and knowledge updating method, based on formal descriptions of enterprise management information interactions. This is very important because the progress of modern science leads to the emergence of new factual or conceptual knowledge. There is a need for proper methods…

Mass media plays an important role in leading public opinion, including in the election of regional head candidates. The tendency of mass media coverage can be used as a parameter to measure the strength of each regional head candidate. To analyze the tendency of media opinion, sentiment analysis is needed. In this study, text mining…

Image stitching is a process of creating a panoramic image by combining multiple images that have overlapping regions of the same scene. It is a challenging topic in image processing, multimedia, and medical applications. The proposed system can be applied in medical applications for scoliosis operations and other long limb operations. The problem of the…

A systematic study of wide bandgap (WBG) based light emitting diodes (LEDs) and photodiodes (PDs) were conducted for the assessment of modular integration of optoelectronic devices into power modules. The temperature dependence of the photoluminescence (PL) efficiency of Indium gallium nitride/Gallium nitride (InGaN/GaN) multiple quantum wells (MQWs) material was studied from 10 to 800 K.…

Network security challenges due to nearly limitless internet connectivity, platform limitations, ubiquitous nodal mobility and huge data transactions is burgeoning by the day and the need for transcend Internet of Things (IoT) based cloud security authentication protocols is on an exponential rise. Even though many secure classic layered security mechanisms are available for implementation, they…

Modern automobiles have been turning more and more into wireless sensor and communication networks. Accordingly, the number of radio systems is steadily increasing. Due to strict safety requirements, these radio systems need to be tested extensively for functionality and reliability, especially under poor radio channel conditions. Beside the large electrical size of cars at frequencies…

The paper focused on the implementation of fuzzy logic technology for improved Wideband Code Division Multiple Access (WCDMA) network using selected Key Performance Indicators (KPIs). Empirical and analytical methods were principally deployed for the study analyses. Empirical analyses were conducted on two designated networks which are MTN and AIRTEL observed with high network traffic to…

Driven by today’s market demand, semiconductor is pushing towards the zero-defect direction. The improvement demanded in semiconductor manufacturing is becoming increasingly challenging. In this paper, common molding defects comprise of voids, incomplete fills, and piping holes are studied systematically, focusing on three key areas: 1) Potential mold flow weakness; 2) Molding temperature stability; as well…

Domain specific modeling (DSM) has become popular in the software development field during these last years. It allows to design an application using a domain specific modeling language (DSML) and to generate an end-solution software product directly from models. However providing a new DSML is a complex and costly job. This can be reduced by…

Voice problems are routinely assessed in hospital voice clinics by speech and language therapists (SLTs) who are highly skilled in making audio-perceptual evaluations of voice quality. The evaluations are often presented numerically in the form of five-dimensional ‘GRBAS’ scores. Computerised voice quality assessment may be carried out using digital signal processing (DSP) techniques which process…