Search Results

As a result of rising expectations for quality, the employment of advanced technical requirements for future fifth-generation (5G) new radio is required. The error-correction coding method is one of the most important components of a new generation. The 5G NR New Radio Low-Density Parity Check (LDPC) codes, which have been adopted by the 5G standard,…

Continuously Variable Series Reactor (CVSR) is a device that can vary the reactance in an ac circuit by controlling the magnetization of a ferromagnetic core, shared by ac and dc windings. The bias dc current can change the equivalent ac reactance(inductance) in order to, for example, control load flow, damp oscillations, or fault current limitation.…

This paper describes the design of a phase shifter with electrically adjustable parameters employing only one voltage differencing gain amplifier (VDGA) and one floating capacitor. This circuit requires no external resistors, resulting in a resistorless design and a low component count. The proposed circuit implements a first-order all-pass filter response with electronic control of its…

This paper extends the idea of creating a Quantum Machine Learning classifier and applying it to real weather data from the weather station behind the Pa Sak Jonlasit Dam. A systematic study of classical features and optimizers with different iterations of parametrized circuits is presented. The study of the weather behind the dam is based…

This communication proposes a grounded immittance function simulator that, depending on the proper choice of the passive components, can simulate parallel-type impedances of the R-L, R-C, and L-C forms. Only two grounded passive components and two voltage differencing buffered amplifiers (VDBAs) are used to implement the suggested circuit. All three simulated equivalent elements, namely Req,…

In this paper, a new syndrome block for Reed Solomon RS and BCH codes used respectively in digital Video broadcasting DVB-S and DVB-S2 has been presented in order to reduce the number of iterations compared to the existed block, which can be found in the literature, the new method is based on a factorization of…

A novel PVTL (Process, Voltage, Temperature, Leakage) detection circuit consisting of four individual detectors is proposed in the investigation. Voltage Variation Detector is composed of a feedback control block comprising multi-stage delay cells using high Vth devices such that 0.5% of VDD variation can be detected. Temperature Detector based on a current to pulse converter…

The main goal of the work is to determine the basic conceptual solutions of a nuclear reactor operating on the surface of another planet. The problem was solved using the example of the Martian nuclear power plant. The article uses calculation and optimization research methods and corresponding program codes (well-known and author’s). The results of…

The paper describes the control and monitoring systems installed in medium voltage networks by Polish distribution network operators. It also outlines the expected directions of development of these systems, specifies the functions of the individual system components and describes the requirements applicable to them. In particular, attention is paid to the implementation of functions to…

We propose and analyze new impedance matching schemes to enhance applied voltage to an optical modulator and light modulation for a subcarrier multiplexed light transmitter or a radio-on-fiber transmitter that carries radio-frequency signal through an optical fiber. Our proposal includes two methods using a quarter-wavelength impedance transformer and a tapered microstrip line for impedance matching…

In this work we discuss a special technique for powering of sensor systems, based on a low-power primary cell consisting of two electrodes, made from different metals, with water (lake, rain or tap water) used as an electrolyte. Once placed into an aqueous solution, the primary cell generates a small electric current, which may be…

Gate driver has been applied in many ways, exemplified by that, by using the DC-isolated and AC-pass characteristics of gate driver’s primary and secondary sides, the problem of floating endpoint in semiconductor power switch can be solved. However, the conventional design of isolated gate driver provides circuit voltage blocking by optically coupled components. Due to…

At the conference “System timing, shaping and signal processing” “SYNCHRONO-2020” there was report: “Simulation of steady state microwave oscillator with dielectric resonator” and “Microwave generators, driven by voltage-based microassemblies with dielectric resonators”. An algorithm for calculating a generator with an open dielectric resonator is described. Based on the DesignLab 8.0 simulation environment, the analysis of…

The paper presents the technique for the user-friendly numerical simulation of coupled oscillators described by the Kuramoto model. Oscillators couplings are defined as arbitrary 2?-periodic functions given by the Fourier series. Matlab procedure was developed to generate netlist for the equivalent electrical circuit diagram of the Kuramoto model. The input data of the procedure include…

In this paper a synchronization methodology of two fractional-order chaotic oscillators under the framework of identical synchronization and master-slave configuration is introduced. The proposed methodology is based on a fractional-order feedback control design under the frame of control theory, the feedback controllers provide synchronization convergence. A comparative study between a proportional control, a nonlinear fractional-order…

In the Internet of Things era it is expected that low-end processor domination of the embedded market will be further reaffirmed. Then, a question will arise, on whether it is possible to enhance performance of such processors without the cost of high-end architectures. In this work we propose a better-than-worst-case (BTWC) methodology which enables the…

The design of microelectronic systems is often complex, therefore metaheuristics can be of a great interest, because in most cases these systems have conflicting objectives and constraints. In this paper, we demonstrate the application of multi-criteria design strategies to a CMOS current conveyor. This provides designers with the ability to develop solutions that can meet…

This article presents an analytical model of a single-phase ferromagnetic core power in- ductor (reactor) based on a magnetic equivalent circuit (MEC). The MEC model consists of magnetomotive forces (MMFs) and reluctances for all flux paths: magnetic core and leakage flux paths. The MEC elements are found established on the characteristics of the ferromagnetic material…

The problem of Pulse Width Modulated (PWM) DC-DC converter simulation is faced in this paper. It is shown how the analysis of this kind of circuits, nonlinear and switching for their nature, can be easily and quickly executed by using symbolic analysis techniques. The paper also presents the program SapWinPE, which performs an automatic symbolic…

Ant Colony Optimization (ACO) algorithm, a well-known robust technique to solve easily both a simple and multiple objective optimization problems. This article presents an application of the ACO in order to achieve the optimal sizing of analog circuit. The proposed technique is employed to optimizing the sizing of a positive second-generation current conveyor (CCII+). Results…

Power converters in automotive industries are needed to source electronic devices. DC-DC Buck converter allows to drive loads ensuring their safety operation taking the car battery voltage as an input to generate a sub-voltage or current. By means of a control loop, the system makes sure that the output variable has the desired value in…

This paper addresses essential features/issues and proposes solutions that would improve the overall performance of a multi-phase buck converter. Low efficiency at light load is addressed with phase shedding, load fast transient and regulated output voltage spiking/dipping is addressed with novel helper technique at the point of load (output node). An Integrated current sensing is…

Piezoelectric energy harvesters (PEH) can be used in many areas of application, including human walking, railways, pavements and bridges. Piezoelectric energy harvesters are currently based on two types of external forces, namely pressure load and mechanical oscillation or vibration. A vibration energy harvesting (VEH) is a mechanical oscillation in a piezoelectric energy harvester that harvested…

As manufacturing efficiency has become a main focus of today’s business, it is very critical to surge the throughput by developing different test strategies. With throughput, testing cost also has been recognized as the major challenge in the future of leading semiconductors. Reducing test time is a significant effort to maximize throughput as the complexity…

This paper is an extension of Novel Flexible Chip-less Bow-Tie RFID tag in which we presented the design, testing and fabrication of the tag and compared the results with Octagonal Chipless RFID tag. The chipless RFID tag was designed by using simulation software CST microwave studio and fabricated by using laser etching technique on a…