Search Results

Achieving targeted reliability for complex products in real-world field environments remains a persistent challenge, even when laboratory validation suggests high performance. A significant reliability gap often emerges during the initial deployment phase, typically within the first one to five years where field failure rates can be up to twice those predicted in controlled settings. Compounding…

Background: Today, Enterprise Resource Planning (ERP) software is a major tool for strengthening competitiveness. They are an asset that is changing work practices through the rapid circulation of information, the coordination of action and the development of new ways of doing things, rapid access to a wide range of knowledge and the opening up of…

The effectiveness and suitability for the reliability and test of the embedded software of the automotive EHPS (Electrical Hydraulic Power Steering) pump are extensively explored in this paper. The Crow-AMSAA analysis has been applied to evaluate the embedded software reliability growth based on the failure data collected in the prototype phase and in the field.…

More than one year after the outbreak of the COVID-19 pandemic the behavior of figures published by official sources of the countries are skeptical for the public. Many probability tests are used to detect the reliability of information among which Benford’s Law. This study focused on the Western Balkan countries, as one of the foremost…

In a radial distribution system, component failure leads to service interruption and subsequent disconnection of a few load points. An abnormal variation in the voltage levels and high power loss gives rise to reliability issues. In this work, feeder reconfiguration is performed to improve reliability, minimize voltage deviation and power loss. A Binary Particle Swarm…

Currently, increasing penetration of the Wind Energy Conversion System (WECs) in Power generation systems has influenced the supply of electrical power reliability for the consumer in comparison with other traditional sources. In this paper, the performance and efficiency of a new optimization approach referred to as the “Differential Evolution Optimization Algorithm” (DEOA) to measure the…

In this paper, we present a new method to deduce minimal cut sets depending on the minimal path sets of the complex systems (networks) to generate the Incidence Matrix, and then compared it with the truth table of the system. This comparison, based on some algebraic properties, gives minimal-cut sets of the complex network with…

This paper studies a trade-off between security (intercept probability (IP)) and reliability (outage probability (OP)) for a multi-hop decode-and-forward (DF) relaying protocol in an underlay cognitive radio network, in presence of a multi-antenna eavesdropper. In the considered protocol, all primary and secondary terminals are equipped with multiple antennas, and they employ transmit antenna selection (TAS)…

Trusted systems are becoming more integrated into everyday life. Security and reliability are at the forefront of trusted system design and are often directed at hardware-only solutions, especially for safety critical systems. This is because hardware has a well-established process for achieving strong, precise, and reliable systems. These attributes have been achieved in the area…

In the current industrial development, an increasing number of sensors is applied for monitoring of any kind of appliances and machines. A predictive mathematical model allows for realistic assessment of the health state of the appliance, indication of service requirements, as well as control of the appliance, serving as so-called digital twin on a control…

Quality assurance of modern-day safety-critical systems is continually facing new challenges with the increase in both the level of functionality they provide and their degree of interaction with their environment. We propose a novel selection method for black-box regression testing on the basis of machine learning techniques for increasing testing efficiency. Risk-aware selection decisions are…

Infrastructure Asset Management was first adopted in 1980s for challenges faced by the utilities, road and rail transport systems, mining, process and manufacturing industries in asset life cycle value optimization. International standards ISO 55000 and PAS 55 were subsequently developed to provide a basis for a structured methodology in the development of Asset Management System.…

Establishing an environment that allows for the quantitative evaluation of the ability of autonomous driving systems to respond to real-world adverse conditions is crucial to ensuring their safety and reliability. This study proposes a dynamic scenario-based simulation framework that simulates complex and sequential hazardous scenarios frequently encountered in actual road environments. The proposed scenarios are…

This study addresses the need for improved prognostics in switch-mode power supplies (SMPS) that incorporate electromagnetic interference (EMI) filters, with a focus on aluminum electrolytic capacitors, which are critical for the reliability of these systems. The primary aim is to develop a robust model-based approach that can accurately predict the degradation and operational lifetime of…

The integration of fluctuating renewable resources such as wind and solar into existing power systems poses challenges to grid reliability and the seamless incorporation of these resources. To address the inherent variability in renewable generation, direct load control emerges as a promising method for demand-side management. Thermostatically controlled appliances, like air conditioners, hold a significant…

Condition assessment of medium voltage assets is essential to ensure reliability and cost-effective operation of power distribution networks. This article presents a literature review of condition assessment of medium voltage assets related to a distribution system in a non-interconnected zone in Colombia, namely, power transformers, photovoltaic systems, switchgear, lines and cables, and instrument transformers. Advanced…

Given the strict Quality of Experience (QoE) and Quality of Service (QoS) criteria for video transmission, such as delivery ratio, transmission delay, and mean opinion Score (MOS), video streaming is one of the hardest challenges in Vehicular Ad-Hoc Networks (VANETs). Additionally, VANET attributes, including environmental impediments, fluctuating vehicle density, and highly dynamic topology, have an…

This paper is an extended version of the journal presented at ICECCME2021. In ICECCME2021, the authors presented that we have developed a solitary wave track circuit (SW-TC), and it is energy-saving compared to existing track circuits. Furthermore, we also explained that it can realize advanced train control at a low cost, equivalent to digital automatic…

A novel PVTL (Process, Voltage, Temperature, Leakage) detection circuit consisting of four individual detectors is proposed in the investigation. Voltage Variation Detector is composed of a feedback control block comprising multi-stage delay cells using high Vth devices such that 0.5% of VDD variation can be detected. Temperature Detector based on a current to pulse converter…

This paper presents findings and proposes recommendations from an evaluation of the level of digital competencies among Saudi university graduates to ascertain their readiness for becoming digital citizens, with high confidence in using digital technologies to successfully engage in digital transformation efforts to achieve Saudi Vision 2030. The sample comprised 352 University of Tabuk students…

Using Proofs of Retrievability (PORs), a file owner is able to check that a cloud server correctly stores her files. Using Proofs of Retrievability and Reliability (PORRs), she can even verify at the same time that the cloud server correctly stores both her original files and their replicas. In 2020, a new PORR combined with…

Serious games are at the forefront of discussions about the future of learning. Research shows that they can help improve student motivation and knowledge transfer by making learning experiences more pleasurable. Teaching practices are increasingly enhanced or complemented by serious games; skills and knowledge are developed by recreating realistic situations allowing learners to enhance their…

The problem of optimal distribution of the current load of a combined heat and power plant with a complex composition of equipment is considered. A multi-criteria approach is proposed for parts of graphs with a constant load in time, considering the factors of economy, reliability and ecology. For sections of the graph with a time-variable…

Fuel Cells (FCs) and Combined Cooling, Heating and Power (CCHP) systems are becoming very popular due to their environmental friendliness and immense applications. This extended review paper commenced by introducing the rampant South Africa’s electricity crisis as the basis for the study, followed by some structural analyses of up to forty-four miscellaneous power electronics converters…

Early detection and proper management of adult degenerative scoliosis (ADS) are important for health promotion. This study aims to develop an ADS screening tool from markerless digital photography and verify its reliability. The study included 17 participants. Outer canthus–horizontal angle (OHA) and trapezius–horizontal angle (THA) were calculated from the image of the upper body of…