With the spread of inverters, the attention of designers naturally turned to 5-phase motors, due to their advantageous properties. In this regard, perhaps the most important issue in the design of such machines is the selection of the correct rotor slot number. Many articles have been published on multiphase machines, however, only few of them…

Skewing of the rotor slot of a squirrel-cage induction machine has been commonly used since the beginning. However, little guidance is given regarding the principle of the working effect of the method, but even in such rare cases, the explanation does not cover the true physical reality. Consequently no formula exists for calculation of the…

In this study, 6 unique microstrip patch antennas with quarter-circular and semi-circular slots in patches are proposed. It is aimed to investigate the effect of these slots in the designed topologies. The antennas operate for wireless applications including Personal Communication Service (PCS), 3rd Generation (3G), The Standard for Wireless Fidelity (WiFi)/Wireless Local Area Network (WLAN)/Bluetooth,…

This article investigates different versions of a new multi-band micro-strip antenna design. NASA inspired the antenna design from “Hand of God” galaxy discovery. A multi-band operation between 0.15 and 8 [GHz] is obtained and captures up to 10 frequency bands. The antenna has a small area of 4 x 5 cm2 and is printed on…

A novel, modified square patch antenna with square open loop resonator slot, operating at 5.5 GHz, for improved bandwidth performance is proposed in this article. A complementary square open loop resonator is introduced on the patch to enhance the bandwidth more than twice that of the conventional square patch antenna operating at the same frequency.…

We present an inverted pendulum design using readily available V-slot rail components and 3D printing to construct custom parts. To enable the examination of different pendulum characteristics, we constructed three pendulum poles of different lengths. We implemented a brake mechanism to modify sliding friction resistance and built a paddle that can be attached to the…

In this study, we conducted an experimental study and efficiency optimization of the outer rotor (hub) BLDC (brushless direct current) motor and axial BLDC motor for light electric vehicles. Both motors were investigated in the simulation environment and experimentally. The axial flux BLDC motor had a rated power of 10 KW, and a rated speed…

Lab sessions in Engineering Education are designed to reinforce theoretical concepts. However, there is usually not enough time to reinforce all of them. Remote and virtual labs give students more time to reinforce those concepts. In particular, with remote labs, this can be done interacting with real lab instruments and specific configurations. This work proposes…

One of the open domain challenges for Spoken Dialogue System (SDS) is to maintain a natural conversation for rarely visited domain i.e. domain with fewer data. Spoken Language Understanding (SLU) is a component of SDS that converts user utterance into a semantic form that a computer can understand. If we scale SDS open domain challenge…

This work presents an innovative solution for parking-sharing of private institutions based on daily occupancy patterns and using different real time tracking methods of vacant parking slots. The research objective consists in finding the most accurate cars detection method, for determining of vacant parking slots and updating them on application web page. Beside the technical…

In this paper, we present a broadband frequency tunable antenna embedding varactor diodes. The reference antenna structure is a square antenna of patch dimensions [39,2 × 39,2] mm², operating at a single resonance frequency 2.45GHz. The recommended procedure to achieve the frequency shifting is to etch rectangular slots on the patch and to embed two…

Peer-to-peer (P2P) energy trading is a mechanism that allows people to share locally the energy they have generated from distributed renewable resources (DER), to generate profit form the unused resources and to reduce the cost for electricity for the household and in the community itself. This calls for the design of new energy markets, accompanied…

This paper presents a novel six band frequency reconfigurable antenna for 2.4 GHz (Lower Worldwide Interoperability for Microwave Access (WiMAX)), 5.3 GHz (Wireless Local Area Network (WLAN)) and 9.1-10.2 GHz (X-band) frequency bands. The proposed antenna has a compact size of 22mm_30mm at lower resonance of 4.2 GHz and is printed on FR4 material with…

Recently, wireless sensor network (WSN) gets more concern due to the robustness in the latest communication technology iteration such as big data, IoT and 5G. Such daily usage of these technologies includes smart home, smart farming, smart traffic control etc. Moreover, WSN becomes the best preference for mobile objects in data accumulating in a wild…

A new microstrip patch antenna for ultra-wideband applications is presented in this paper. The design and performance of the antenna component are discussed. The propounded antenna is mounted on a compact FR-4 substrate having dimensions 20 x 30 x 1.6 mm3 with relative permittivity εr=4.3. The rectangular patch antenna is slotted with two types; rectangular…

An ultra-wideband (UWB) printed antenna (PMA) powered by a compact coplanar waveguide (CPW) is featured. The propounded antenna is supposed to cover the UWB range from 7 GHz to 10 GHz, with return loss values below -10 dB in the whole frequency range, for X-band applications, often used for dense satellite communications. The 30 x…

This paper first simplifies the GA-optimized filter structure developed by us. Then the filter structure is modified by introducing slot and conductor stubs, based on electric fields and magnetic currents at resonant and transmission zero points. As a result, return losses in two passband regions are suppressed more than 28 dB, and also insertion loss…

This article proposes a new MAC scheme for Vehicle-to-Infrastructure (V2I) communications that dynamically reallocates unused TDMA slots. By maintaining a balanced waiting time, the proposed TDMA based scheduling scheme allocates TDMA slots in a rational way to minimize merging and one-hop neighboring collision. The proposed scheme ensures dynamic reallocation of unused slots by using “time…