Search Results

For mission-critical and time-sensitive navigation of autonomous vehicles, controller design must exhibit excellent tracking performance with respect to the speed of convergence to reference command and steady-state accuracy. In this article, a novel design integration of the neural network with the traditional control system is proposed to adaptively obtain optimized controller parameters resulting in improved…

This article examines the use of non-ideal current and voltage sensors for sensorless speed control for a fixed field DC motor. A PID type speed controller with KF estimator was applied to control the DC motor and IAE, settling time, and peak overshoot were taken as performance indices. However, KF facilitated the noise reduction. After…

The decision support systems regarding the Supply Chains (SCs) management services can be significantly improved if an effective viable method is utilised. This paper presents a robust simulation optimisation approach (SOA) for the design and analysis of a granularity controlled and complex system known as Consumer Supply Network (CSN) incorporating uncertain demand and capacity. Minimising…

Considering link vibrations, the main limitation affecting flexible manipulators, this article seeks to make a contribution by presenting an enhanced two degree of freedom vibration controller. This controller uses a filtered right inverse controller in the feedforward and strain feedback controller in the feedback path. The Filtered inverse controller damps transient vibrations while preserving joint…

This paper deals with the control problem for nonholonomic wheeled mobile robots moving on the plane, and in particular, the use of a Fuzzy controller technique for achieving a given motion task which consists of following a rectilinear trajectory until an obstacle occurs on the path. After a background part, in which the fundamental knowledge…

Rescue operations require technology to assist the rescue process. The robotic technology in these missions is becoming very important. The important aspects investigated in this study are the integration of a mechatronic system that will allow for a robotic platform with a vision system. The research collaboration between Argentina and South Africa is discussed, with…

In densely located loosely coupled wireless charger environments, cross-connection errors can occur when wireless chargers operate at the same time within the same wireless communication range. In this work, an effective algorithm is proposed to prevent cross-connection error. The algorithm based on the cross-connection abatement technique with the received signal strength indicator of out-band BLE…

To gather information rapidly in disaster sites, a lot of search/rescue robots have been developed. It is difficult to correspond to the complicated environment composed of fields requiring various locomotion strategies, because most of these robots have only one type of locomotion device. To increase the available search routes under such conditions with the aim…

In this age of smart devices, many people are carrying a smartphone with them all the time. When they are at home, most of them are connected with the home Wi-Fi network. In this paper, a Wi-Fi network based architecture is proposed to control home appliances using a smartphone and also with a touchscreen-based wall…

This article discusses IoT security in situations whereby devices do not share the same security domains, which raises security, privacy and safety concerns. It then presents an Access Control and Privacy infrastructure for addressing these concerns in the context of distributed environments. IoT deployments allow billions of connected physical devices to collect, process and share…

In most industrial high-power applications, the brushless DC (BLDC) motor is connected to multi-level inverters specially the three-level NPC inverters (B12). Torque ripple is a critical issue in BLDC motor drives. Accordingly, minimizing the ripple produced in the torque is necessary to enhance the BLDC motor drive performances. This paper aims to develop two direct…

This paper presents the input-output feedback linearization and decoupling algorithm for control of nonlinear Multi-input Multi-output MIMO systems. The studied analysis was motivated through its application to a robot manipulator with six degrees of freedom. The nonlinear MIMO system was transformed into six independent single-input single-output SISO linear local systems. We added PD linear controller…

In this research paper, the development and evaluating of a smart controller for electrical powered wheelchairs are presented. The controller aimed to assist quadriplegic, paralyzed, and handicap patients who cannot use their hands to drive an electrical wheelchair by using a joystick controller. Two sub control units have been combined in one hybrid system to…

With the increasing need for effective storage management due to ever-growing content-generation over the Internet, Distributed Storage Systems (DSS) has arisen as a valuable tool. Although DSS has considerably improved in the past years, it still leverages legacy techniques in its networking. To cope with the demanding requirements, Software Defined Networking (SDN) has revolutionized the…

The aim of the present work is to guarantee the trajectory tracking of a nonlinear biological process and compare two control approaches. The main objective of this work is to elaborate a fuzzy model and build a fuzzy controllers for a biological process by using the fuzzy Takagi-Sugeno. Two controllers are synthesized, the parallel distributed…

The increasing demand for advanced services in wireless networks raises the problem for quality of service (QoS) provisioning with proper resource management. In this research work, such a provisioning technique for wireless networks is performed by Call Admission Control (CAC). A new approach in CAC named by Defined Limited Fractional Channel (DLFC) is proposed in…

Doubly fed asynchronous machines have an outstanding property: they can be operated up to twice rated speed delivering full rated torque. This paper presents, for the first time in the literature, a control system for multiphase asynchronous machines fed by Voltage Source Inverters (VSIs) both in stator and rotor that incorporates the harmonic torques. The…

This paper is an extension of work originally presented in conference name” Study Performance of Speed Tracking Control with Frequency and Amplitude Dependence”. Though many PMSMs (Permanent Magnet Synchronous Motor) control approach have already been published, little endeavors have been invested in the study of speed tacking control with frequency or amplitude dependence. The use…

To evaluate the effects of Ondansetron on the negative and depressive symptoms of patients with schizophrenia. A double-blind randomized control trial was conducted in 2016-17 in Lahore. 30 participants were included both in placebo and medicine group. The patients were assessed by using the Positive and Negative Syndrome Scale (PANSS) and Hamilton’s Rating Scale for…

The pitch angle controller maintains the aerodynamic captured power at rated level when the wind speed is above the rated speed. Besides, it can also improve the transient stability occurring in the wind energy system (WES). This paper, therefore, proposes an effective pitch angle control strategy that can deliver the conditioned output power in windy…

This work presents a comparison between controller tuning methods for a multivariable steam generator. Controller tuning has a remarkable impact on closed loop performance. Methods selected were Single-Loop Tuning (SLT), Biggest Log Modulus Tuning (BLT), Sequential Return- Difference (SRD) and Structured H(inf) Synthesis (S-H(inf)). Method assessment takes into account set-point tracking, disturbance rejection, tuning effort and…

This paper presents a novel direct torque control (DTC) strategy aimed to four-switch three-phase (FSTP) inverter-fed an interior permanent magnet synchronous machine (IPMSM), using a fuzzy logic toolbox in speed control loop. In fact, the introduced DTC approach is based on the emulation of the operation of the standard six-switch three-phase (SSTP) inverter. This fact…

The objective of this paper is to investigate three different approaches of modeling, design and discrete-time implementation of PI closed-loop control strategies in SIMULINK simulation environment, applied to a centrifugal chiller system. Centrifugal chillers are widely used in large building HVAC systems. The system consists of an evaporator, a condenser, a centrifugal compressor and an…

This paper is devoted to the analysis of aircraft dynamics in the cruise flight phase under windshear conditions. The study is conducted with reference to a point-mass aircraft model restricted to move in a vertical plane. We formulate the problem as a differential game against the wind disturbances: The first player, autopilot, manages, via additional…

In this paper, we investigate the decentralized control problem for largescale interconnected systems. The synthesis of the decentralized controller consists in determining gains which ensure the stability of the global system. To calculate these gains, three approaches are presented. Our main contribution is to develop a new decentralized stabilization approach which the decentralized local gains…