Search Results

The entire electrical system is changing at an abrupt speed since its beginning. With the rapid advance of renewable energies (which are constantly subject to fluctuations), the electricity generation is distributed to countless locations. The traditional model of the unidirectional flow of electricity is leaning towards multidirectional flows. This situation needs significant changes in the…

FM broadcast stations generate reverse intermodulation signals that cause communication problems between ATC controllers and pilots in the Air Traffic Control systems (ATC) in Thailand. In this paper proposes a balanced RF power amplifier using the improvement 3-dB quadrature hybrid couplers to reduce the reverse intermodulation of FM broadcasting systems. The mathematics analysis of the…

Recently, communication demands often change because of the various network services in companies and individuals. Software Defined Networking (SDN) has emerged as a viable control paradigm that allows flexible communication, using OpenFlow as its default standard and enabler. However, when changes happen frequently in SDN networks due to unforeseen reasons -such as a network failure…

The current industrial landscape is becoming increasingly aware of the need to optimize energy use and management for all domains, including telecommunications. Among others, RF Energy Harvesting is a promising technique for 5G systems as an alternative to traditional energy supply sources. This paper presents 5G landscape and ecosystem. It positions RF-Energy Harvesting in 5G…

Braille system is purposely made for visually impaired people, to support their literal communication in order to share their knowledge. Louis Braille introduced the braille system consists of series dots which are embossed to read by touching. Early days Braille papers are made manually, but at current days braille documents are made using machines. Due…

An experimental transmission between two XBee modules using Radio over Fiber technique is demonstrated. Data issued from an XBee module coded on a wireless microwave carrier at 2.44GHz is transmitted through an optical link of 25.24 km. The optical transmission is based on an external modulation scheme over a dispersive channel. Frequency response of the…

This study is the extension of the previous study about “Traffic Service Quantitative Analysis Method under Developing Country” in 2018 International Conference on Advances in Computing, Communications and Informatics (ICACCI). In the previous study, it is introduced how to make quantitative calculation for traffic congestion by traffic parameters and its characteristics curve such as traffic…

Recently, wireless sensor network (WSN) gets more concern due to the robustness in the latest communication technology iteration such as big data, IoT and 5G. Such daily usage of these technologies includes smart home, smart farming, smart traffic control etc. Moreover, WSN becomes the best preference for mobile objects in data accumulating in a wild…

A new microstrip patch antenna for ultra-wideband applications is presented in this paper. The design and performance of the antenna component are discussed. The propounded antenna is mounted on a compact FR-4 substrate having dimensions 20 x 30 x 1.6 mm3 with relative permittivity εr=4.3. The rectangular patch antenna is slotted with two types; rectangular…

We examine design principles from more than 20 years of experience in the implementation and protection of mission critical flight systems used by the Mission Design and Navigation Section at NASA’s Jet Propulsion Laboratory. Spacecraft navigation has rigorous requirements for completeness and accuracy, often under critical and uncompromising time pressure. Fault tolerant and robust design…

The telecommunications industry continues to move forward with plans for 5G service with rates including 6Gb/s followed by upgrade paths promising 20Gb/s. Despite advances in wireless technology associated with 5G roll-outs, there remains the problem of providing sufficient backhaul throughput and efficient handling of hand-off services within the relatively small projected cell boundaries that can…

An ultra-wideband (UWB) printed antenna (PMA) powered by a compact coplanar waveguide (CPW) is featured. The propounded antenna is supposed to cover the UWB range from 7 GHz to 10 GHz, with return loss values below -10 dB in the whole frequency range, for X-band applications, often used for dense satellite communications. The 30 x…

In advanced metering infrastructure (AMI) of smart grid, WiFi is an appropriate choice for its bidirectional communication requirement to transmit data to the billing center. But, WiFi functions in the free spectrum bands and LTE also requires to use the same free bands for its network expansion being licensed spectrum is limited and expansive. LTE…

There exists a profound difficulty of communication between the people that works in the EMC area in circuit terms and the people that works in field terms. In this paper we show that when the matter is predominantly distributed along a certain direction in space, as for transmission lines, the electromagnetic field can be divided…

The paper focused on the implementation of fuzzy logic technology for improved Wideband Code Division Multiple Access (WCDMA) network using selected Key Performance Indicators (KPIs). Empirical and analytical methods were principally deployed for the study analyses. Empirical analyses were conducted on two designated networks which are MTN and AIRTEL observed with high network traffic to…

Our work demonstrates how to use contemporary software tools on older or “legacy” robots while keeping compatibility with the original control, tools, and calibration procedures. This is done by implementing a lightweight middle-ware called MDS-Ach connected directly to the hardware communications layer of the robot’s control system. The MDS-Ach middle-ware, which relies on the x-Ach…

In this research work, we are implementing a student performance evaluation model using Mamdani Fuzzy Inference System (FIS) and Neuro Fuzzy system and comparing the results with classical averaging method for Network Analysis (NA) course studied by third semester Electronics and Communication Engineering students. This work explains the designing of scoring rubrics using Bloom’s levels…

In densely located loosely coupled wireless charger environments, cross-connection errors can occur when wireless chargers operate at the same time within the same wireless communication range. In this work, an effective algorithm is proposed to prevent cross-connection error. The algorithm based on the cross-connection abatement technique with the received signal strength indicator of out-band BLE…

Nowadays, many companies and organizations use various encryption techniques to secure their private data before send it through the unsecure network. However, many attackers try to store private data by using various attacks. Most of the organizations use password based encryption algorithm (PBE) to protect their private data. However, the existing PBE methods are vulnerable…

The contents of this article consist of an extension original work presented at the 4th International Conference on Control, Automation and Robotics (ICCAR 2018) and aims to develop the systematic model of an effective triggering system of production Kanban size towards Just-In-Time (JIT) production system. The developed model was introduced based on the philosophy of…

Language skill is a rule-like operation, based on generalized connections. The main property of language skills is awareness. They are formed with conscious mastery of the language means of communication (phonetic, lexical and grammatical). Language acquisition is a complex process which includes a large number of different parameters. Therefore, the study and improvement of language…

Fifth generation of mobile networks (5G) comes to cope with the context of the new mobile telecommunications era. Edge computing is a new collaborative technology under standardization utilizing end-user devices or near-end-user edge devices to operate processing, communication, or control operations. The achievement of efficient error control is a very critical aspect in the successful…

The latest design approach for Data Centers (DCs) follows the direction of exploiting optical switching to connect Top-of-Rack (ToR) switches that serve thousands of data storing and computing devices. A ToR’s usual function is the Virtual Output Queues (VOQs), which is the prevalent solution for the head-of-line blocking problem of the DC switches. An effective…

There are more than 7billion people in the world where there are around 500 million people in the world who are denied from normal lifestyle due to physical and mental issue. It is completely fair to say that every person deserves to enjoy a normal lifestyle. While physically and mentally challenged people find suitable way…

In this research we address the problem of routing information across dynamic temporal sensor networks. The goal is to determine which information, generated by sensors on resources at various times, is able to be routed to other resources, consumer resources, within the given information time window, while being constrained by temporally dynamic bandwidth limitations across…