Search Results

Erosion affects large parts of Moroccan land, particularly in the mountains leading to soil quality deterioration and less vegetation cover. Located in the South-west of Morocco, the Site of Biological and Ecological Interest (SBEI) of Ain Asmama, where erosion threatens a major part of the region was investigated. The site has a terraced transitional bioclimate,…

In this paper, we investigate and analyze parameters degradation in a typical photovoltaic (PV) cell, which lead to power loss under dark as well as light condition using measured current-voltage (I-V) data. A nonlinear least squares method to extract the parameters such as the reverse saturation currents, the ideality factors, the series and shunt resistances…

Degradation measurements are often treated and analyzed for improvement the reliability of system. Our objective in this paper is to study a class of non linear systems, whose dynamics and observations are non linear functions of the state. Obviously, we develop an Extended Kalman Filtering (EKF) algorithm for detecting the additive failures in a two…

The purpose of this conference is to present and analyze di_erent models accounting for the thermal degradation of combustible materials (biomass, coals, mixtures…), when submitted to a controlled temperature ramp and under non-oxidative or oxidative atmospheres. Because of the possible rarefaction of fossil fuels, the analysis of di_erent combustible materials which could be used as…

Extemporaneous omeprazole-based preparations are commonly used in hospitals; however, there are no validated studies about physicochemical stability. This study aimed to determine if temperature, luminosity, and the type of diluent affect the stability of omeprazole in the extemporaneous preparation. For stability, the methodology validated previously by our group was used. The 2k experimental design included…

This study addresses the need for improved prognostics in switch-mode power supplies (SMPS) that incorporate electromagnetic interference (EMI) filters, with a focus on aluminum electrolytic capacitors, which are critical for the reliability of these systems. The primary aim is to develop a robust model-based approach that can accurately predict the degradation and operational lifetime of…

The exponential growth in the number of automobiles over the past few decades has created a pressing need for a robust license plate identification system that can perform effectively under various conditions. In Morocco, as in other regions, local authorities, public organizations, and private companies require a reliable License Plate Recognition (LPR) system that takes…

Transformers are habitually designed and manufactured for operation at a fundamental frequency of 50Hz and sinusoidal load current. Transformers are susceptible to non-linear loads. The inception of switching action characterises Non-linear loads and consequently nonsinusoidal load current which brings about higher transformer service losses, hotspot temperature rise, and degradation of cellulosic and liquid insulation, and…

For systems using rotating machinery, diagnosing the faults of the rotating machinery is critical for system maintenance. Recently, a machine learning algorithm has been employed as one of the methods for diagnosing the faults of rotating machinery. This algorithm has an advantage of automatically classifying faults without an expert knowledge. However, despite a good training…

The filter bank multi-carrier (FBMC) technique is being considered as the major candidates for the 5G schemes. The orthogonal frequency division multiplexing (OFDM) technique is used in 4G but it has drawbacks such as higher Out-of-Band (OOB) power reduction, and higher peak to average power ratio (PAPR). OFDM uses cyclic prefix (CP) extension to overcome…

Transformer health assessment techniques, based on applicable standards, such as the dissolved gas analysis (DGA), through laboratory testing or online monitoring are used to analyze the symptoms of a failure which develops in transformers from an early stage. The DGA from a sample of dielectric liquid taken from the main tank generates information on the…

To reduce the risk of accidental system shutdowns, we propose to control system developers (supervisor, SCADA) a prediction tool to determine the occurrence date of an imminent failure event. The existing approaches report the rate of occurrence of a future failure event (stochastic method), but do not provide an estimation date of its occurrence. The…

To build a precise mathematical model describing a natural phenomenon, parameter estimation is needed to achieve the best parameter value. In this paper, we have calculated the best parameter value for a two-dimensional advection-dispersion differential equation of the biological oxygen demand degradation process in a facultative wastewater stabilization pond. This research was conducted with case…

Demak is located on the north coast of Java, precisely in Central Java Province, Indonesia which has many problems related to erosion and shoreline degradation. This study attempts to analyze, identify, and select the materials to build eco-friendly permeable breakwater in Demak. The research was conducted during 2014, consist of several activities, i.e. identified the…

As an emergent technology in Internet of Things (IoT), the ultimate target of fog computing is to provide a widely distributed computational resources and data repository closer to the network edge providing heterogeneous systems both in terms of software and hardware. The fog system must have the capability to deal with huge number of resources…

Treatment plants have been developed in many countries to handle wastewater, therefore, many pieces of researches have been conducted in order to optimize the outcomes. In this article, a mathematical optimization model was developed using quadratic programming approach to optimize the pollutant degradation at the domestic wastewater facultative stabilization ponds. The data used in this…

Zirconium trisulfide ZrS3 is a representative of transition metal polysulfides containing sulfur as S–1 in polysulfide, usually disulfide S22– groups. Semiconductive zirconium trisulfide which absorbs visible light near UV edge was considered as a possible photocatalyst. We experimentally studied photodecoloration of methyl orange in presence of ZrS3. It was shown for the first time that…

The proposed solution is intended for virtual universities wishing to improve their distance learning platforms. These enhancements include the instructional content model, how to deliver courses to students, and how to evaluate students’ knowledge. With this solution that improves the functionality of Moodle, virtual classes now include new features such as the transfer of heavy…

A 500 KVA Uninterruptible power supply (UPS) using Fuel Cells (FC) and super-capacitors (SCs) was studied with the worst case of 10 minutes and eight hours of interruption per day. A power management system was established to control the FC and the SCs in order to extract the hybridization benefits with a comparison between a…

Microelectromechanical Systems (MEMS) are devices made up of several electrical and mechanical components. They consist of mechanical functions (sensing, thermal, inertial) and electrical functions (switching, decision making) on a single chip made by microfabrication methods. These chips exhibit combined properties of the two functions. The size of system has characteristic dimensions less than 1mm but…

This paper presents on-chip testing structures to characterize and detect faulty Through Silicon Vias (TSVs) in 3D ICs technology. 3D Gunning Transceiver Logic (GTL) I/O testing is proposed to characterize the performance of 3D TSVs in high speed applications. The GTL testing circuit will fire different data patterns at different frequencies to characterize the transient…

In-elastic recovery behavior of seamless tube material has been investigated by uniaxial tensile tests. Unloading Stress–Strain curves obtained under different passes of cold drawing process shows that the percentage of in-elastic recovery to the total recovery increased with plastic deformation. This paper is an experimental study that shows Young’s Modulus decreases with plastic strain for…

This paper presents a comparative study of using different color systems on watermarking algorithms. This comparison aim is to determining the robustness and the stability of the color systems used in the watermarking scheme. The watermarking algorithm that is used in this paper is a hybrid scheme using the Discrete Wavelet Transform (DWT) in the…