Within the results of scientific research, vibrations and their reduction have been described for the brushless direct current motor with permanent magnets (BLDC motor). In this paper, calculations (the finite element method using commercial Finite Element Software Ansys) and measurements were performed to identifying the sources of vibrations in BLDC motor. The article presents numerical…

A process for the determination of a required spatial resolution in the collection of the Received Signal Level (RSL) is discussed. This method considers RSL measurements as a three dimensional surface that is sampled through the data collection process. In addition, it is difficult to collect RSL measurements for an entire coverage area because of…

Complex networked systems provide a cornucopia of network statistics, many of which relate to the temporal behaviour of subsystems, devices, or even individual protocol layers. Different and flexible visualizations can play a crucial role in discovering and making patterns, relations, and trends tangible. We developed PerfVis, a tool that visualizes timestamp data to aid in…

In regions like the African equatorial region, where ground-based sensors like ionosondes and incoherent scatter radars are limited, satellite-based radio occultation (RO) observations offer a new alternative for ionospheric data collecting and optimization. Using RO measurements from the mostly newly launched COSMIC-2 (Constellation Observing System for Meteorology, Ionosphere, and Climate-2) mission, hence, the equatorial Africa,…

In this paper we present a measurement system that is able to evaluate radar algorithms for vital signs sensing applications. For such medical applications, it is crucial to develop robust and reliable algorithms that are tested in a laboratory environment. The presented measurement system generates reproducible vital sign micro movement and dynamic clutter using loudspeakers…

The “Electronic Nose” approach, which is exclusive to gas measurement systems, uses gas sensors as odor detectors. Design faults exist in the existing electronic nose (e-nose) chamber, such as its large volume, difficult construction, etc. In order to obtain measurements in a satisfactory state, we want to create a gas chamber that can provide favorable…

Knowledge of pedestrian and vehicle movement patterns can provide valuable insights for city planning. Such knowledge can be acquired via passive outdoor localization of WiFi-enabled devices using measurements of Received Signal Strength Indicator (RSSI) from WiFi probe requests. In this paper, which is an extension of the work initially presented in WiMob 2021, we continue…

This article presents a roadmap for distribution grid µPMU hardware and software design consideration and implantation to ensure high performance within limited computational time of sampling frequency 512 samples/cycle. A proposed 12 channels, multi-voltage level µPMU hardware and rules of voltage and current transducer, analog filter, analog-to-digital converter, sampling rate definition, and PCB design and…

In this paper, we propose a highly accurate indoor position and direction estimation system using a simple fully connected deep neural network (DNN) model on Bluetooth Low Energy (BLE) Received Signal Strength Indicators (RSSIs). Since the system’s ultimate goal is to function as an indoor navigation system, the system estimates the indoor position simultaneously as…

On Renewable Energy (RE), this field covers the most significant share of the world energy demand and challenges on the expensive measurement and maintenance equipment to be used. In all studies and designs, global solar radiation (GSR) measurements require assessment, estimation, and models to be applied together with the environment and meteorological data on installing…

The present work develops an estimator for thermal conductivity using a simple exper- iment implemented in a simulated solid metallic bar. The bar is sectioned in a finite number of segments, lately called nodes, and a discretization of the Fourier heat equation is applied in each node to generate a timed-spaced model of the temperature…

The paper examines the company’s proprietary means for determining the quality of a software product and measuring its technical debt. The paper’s authors explain how a software product’s quality is directly correlated with the amount of varying technical debts that the end-users receive. All debts can be paid, and technical debt is no exception: one…

Internet addiction (IA) has adverse effects on psychophysiological responses, interpersonal relationships, and academic and occupational performance. IA detection has received increasing attention. Although questionnaires enable long-term assessment (over 6 months) and physiological measurements to aid the short-term evaluation (over 2 min) of IA, the lack of algorithms results in an inability to detect IA in…

General relativity and its modified theories are unable to account for quantum mechanics and cannot explain dark matter or the origin of the gravitation. This paper presents a theory that describes how Newtonian gravitation originates at the level of the particle, and how particles induce gravitation and respond to the source of gravitation. This paper…

This article extends novelty of modeling capacitive accelerometer with PID controller to provide PI controller for better tuning and statistical test to determine the linear validation characteristics of closed capacitive accelerometer. Capacitive accelerometer is a sensor which uses the dynamic law of physics model Position-Velocity-Accelerator (PVA) by the movement of an electrode coupled to mass…

In the phosphate industry, sulfuric acid is a key compound in phosphoric acid and fertilizer production. Industrially, the sulfuric acid H2SO4 is made generally in a sequence of three main steps: burning liquid sulfur with air, catalytic oxidation of sulfur dioxide SO2 to sulfur trioxide SO3, and formation of H2SO4 by the reaction of H2O…

Solar ultraviolet radiation (UVR) is considered a relevant health risk for the workers of the maritime and port sectors, but scant data are available on actual exposure measured using personal dosimeters. Moreover, in outdoor workers sun protection habits are usually poor, while some promising data suggest that sun-safety campaigns can be effective in increasing self-protection…

In this paper, we investigate and analyze parameters degradation in a typical photovoltaic (PV) cell, which lead to power loss under dark as well as light condition using measured current-voltage (I-V) data. A nonlinear least squares method to extract the parameters such as the reverse saturation currents, the ideality factors, the series and shunt resistances…

This article proposes a compact and simple design of electronically adjustable voltage-mode biquadratic filter using fundamental active cell implemented on a single integrated circuit (IC) package as LT1228. The proposed circuit having triple inputs and single output (TISO) employs namely one resistor and two capacitors as the passive components. All the five possible biquadratic filtering…

The angle of attack is a critical flight parameter for commercial aviation aircraft, because automatic envelope protection systems rely on it to keep the aircraft within its safe flight envelope. Faulty measurements of the angle of attack could have catastrophic effects, leading to aircraft loss of control in flight and fatalities, as demonstrated by the…

Soil moisture is one of the most important variables to monitor in agriculture. Its analysis gives insights about strategies to utilize better a particular area regarding its use, i.e., pasture for cows (or similar), production forests, or even to answer what crops should be planted. The vertical structure of the soil moisture plays an important…

The phasor Measurement Unit is a modern tracking tool mounted on a network to track and manage power systems. PMU is accurate and time-synchronized device that gives voltage phasor measurements in nodes and current phasor measurements connected to those nodes where the PMU is installed. This study introduces the Genetic Algorithm for optimization of allocation…

Smart animal husbandries require the adoption of dedicated tools to assess the contribution of each animal to the production process. The IoT platform presented in this article is a real-team monitoring system for voluntary weighing of cattle. To this end, the ISO 18000-6 standard is used for animal identification through an ultra-high-frequency radio link between…

To evaluate and compare methods in computer vision, scientists must use a benchmark dataset and unified sets of measurements. The UCI-EGO dataset is a standard benchmark dataset for evaluating Hand Pose Estimation (HPE) on depth images. To build robotic arms that perform complex operations such as human hands, the poses of the human hand need…

This paper covers the study of high-frequency (~ 1 GHz) ZnO piezoelectric transducer integrated on a silicon substrate able to generate both compressional and shear acoustic waves. First, to promote the longitudinal mode, an electrical matching of the transducer in this high-frequency range is effectuated. Second, to promote shear waves, new deposition conditions were applied,…