Search Results

The IEEE 802.11n wireless local-area network (WLAN) has been extensively deployed around the world due to the flexibility, lower cost, and the high-speed data transmission capability at 2.4 GHz ISM band. However, in the WLAN deployment, one key challenge is to optimize the channel assignment of access-points (APs) under the small number of partially overlapping…

Knowledge Based Systems play a very important role, within Healthcare, with a primary goal of supporting a high quality service at an optimal cost. A widely accepted knowledge acquisition technique is through the use of Business Rules in a natural language like format. As clinical terminology is centric to HealthCare, a large percentage of these…

We have suggested an architecture of the second-order all-pass active RC-filter (ARCF), based on three differential difference amplifiers (DDA’s), which provides full set of amplitude-frequency responses (AFR’s) (low pass filter (LPF), high pass filter (HPF), band pass filter (BPF), rejection filter (RF)). We have given the basic equations, which allow ARCF’s. The results of computer…

This paper analyzes the process of reactive power compensation using thyristors switched capacitors TSC topology based on multiterminal switch during the starting of induction motor. The paper explains the control principle of this TSC topology which depends on the multiterminal switch. To actively track the required reactive power for the dynamic load and to perfectly…

In previous study, it is difficult to estimate the biological states such as postural ones and aetas in accordance with the previous analysis of electrogastrograms (EGGs), basically the frequency resolution of healthy individuals. In addition, few studies have compared gastric myoelectrical activity in supine and sitting posture. The aim of this study is to evaluate…

This study examined the performance of two proposed permutation methods for Chow test analysis and the Milek permutation method for testing structural break in linear models. The proposed permutation methods are: (1) permute object of dependent variable and (2) permute object of the predicted dependent variable. Simulation from gamma distribution and standard normal distribution were…

The main problem of the distribution of freight in archipelago countries such as Indonesia is how to ensure that the outlying and outermost islands are served optimally, with low freight costs and optimal frequency of vessel stops at ports. There are three types of vessels that are subsidized and have the duty of public service…

Renewable energy becomes an appealing technology used in many applications in our life. Environmentally, it reduces CO2 emissions and enhances the sustainability of the system. This paper study the benefits of using a photovoltaic system with a thermal storage tank to power air-cooled chiller, in two different scenarios. The simulation methodology is adopted in this…

This article investigates different versions of a new multi-band micro-strip antenna design. NASA inspired the antenna design from “Hand of God” galaxy discovery. A multi-band operation between 0.15 and 8 [GHz] is obtained and captures up to 10 frequency bands. The antenna has a small area of 4 x 5 cm2 and is printed on…

Pursuit Evasion Game (PEG) is an abstract model of various significant problems that appear in both civil and military applications. Bio- Inspired strategies are found to be very useful in studying the PEG. While optimal response to the pursuit strategies are available using geometric control theory, it is shown in this paper that application of…

Many robots have been proposed for smart applications in recent years However, while these robots have good ability to move between fixed points separated by short distances, they perform less well when required to navigate complex interior spaces with an irregular layout and multiple obstacles due to their relatively crude positioning and path control capabilities.…

Digitization is viewed as the capability to utilize digital technologies for generating processing, sharing and transacting information. Studies show that digitization has now become ubiquitous. In almost all the sectors, we routinely interact with digital technologies. As a result, the impact of digitization is being observed in such sectors. For instance, the positive impact of…

This study is the extension of the previous study about “Traffic Service Quantitative Analysis Method under Developing Country” in 2018 International Conference on Advances in Computing, Communications and Informatics (ICACCI). In the previous study, it is introduced how to make quantitative calculation for traffic congestion by traffic parameters and its characteristics curve such as traffic…

Vision-based defect detection techniques are widely used for quality control purposes. In this work, an efficient deflectometry based detection system is developed for semi-specular/painted surface defect detection. This system consists of a robotic arm that carries a screen/camera setup and can detect defects on large surfaces with different topologies, such as a car bumper, by…

This article presents a bridge crane nonlinear dynamic model in 2-dimensional space, and then given a novel adaptive fuzzy-sliding mode controller based on combining sliding mode control with fuzzy logic and Lyapunov function. Firstly, the article proposes an intermediate variable to link signal between two slide surfaces, related to trolley movement and payload swing. Then…

The article proposes a Digital Predistortion (DPD) methodology that substantially meliorates the linearity of limited range Mobile Front Haul links for the extant Long-Term Evolution (LTE) and future (5G) networks. Specifically, the DPD is employed to Radio over Fiber links that contrive of Vertical Cavity Surface Emitting Lasers (VCSELs) working at 850 nm. Both, Memory…

The main importance of solar photovoltaic energies research is to meet the many environmental demands of the energy challenge, to maximize power and to reduce the costs of photovoltaic (PV) systems to reply the energy needs of population. In the present research work, the first objective is to study the performance and the output energy…

In this paper, a novel method is proposed for the dynamic analysis of fractional- order three-dimensional electrically coupled cell network. In general, three- dimensional cell network is constructed by combining three one-dimensional circuit networks. Analysis method is based on the principles of the dynamic analysis with transfer function approximation. Although fractional-order three-dimensional circuit network model…

This article presents a comprehensive review on the feasibility and challenges of millimeter wave in emerging fifth generation (5G) mobile communication. 5G, a multi-gigabit wireless network is the next generation wireless communication network. The mmWave cellular system which operates in the 30-300 GHz band has been proposed for use as the propagation channel. Its large…

The modern stage of information technology development is characterized by the acute need to use cognitive technologies for the solution of tasks of practice, in particular, in the sphere of real world objects monitoring and management. Practical usage of cognitive systems of monitoring is significantly limited to two factors now: operation at the level of…

The task of fuzzy mathematical modeling of the composition of a polymer composition is singled out and formulated, as one of the types of chemical-technological systems for creating the theoretical foundations for managing the physicochemical properties of the material produced from this composition. Fuzzy data on the technical functions and concentration of individual ingredients that…

This paper is an extension of work originally presented in 2018 Global Smart Industry Conference (GloSIC). Researches are devoted to the development of Smart technology for complex objects control and prediction on the basis of a distributed Honeywell DCS control system of the TengizChevroil enterprise using the example of a technological process of medium pressure…

This paper presents a novel six band frequency reconfigurable antenna for 2.4 GHz (Lower Worldwide Interoperability for Microwave Access (WiMAX)), 5.3 GHz (Wireless Local Area Network (WLAN)) and 9.1-10.2 GHz (X-band) frequency bands. The proposed antenna has a compact size of 22mm_30mm at lower resonance of 4.2 GHz and is printed on FR4 material with…

The research programme reported in this paper is set within the framework of our research under the theme of ICT support for Active Healthy Ageing (AHA). This longitudinal empirical research is focused on the study of the impact on the management of cardio-vascular disease if supported by sustained health monitoring using wearable connected devices. One…

Recently, wireless sensor network (WSN) gets more concern due to the robustness in the latest communication technology iteration such as big data, IoT and 5G. Such daily usage of these technologies includes smart home, smart farming, smart traffic control etc. Moreover, WSN becomes the best preference for mobile objects in data accumulating in a wild…