Search Results

The main importance of solar photovoltaic energies research is to meet the many environmental demands of the energy challenge, to maximize power and to reduce the costs of photovoltaic (PV) systems to reply the energy needs of population. In the present research work, the first objective is to study the performance and the output energy…

A method for coupling of local and global fields related to currents, voltages and magnetic fields in magnetodynamic problems is developed in the frame of the finite subproblem finite element method. The method allows to correct the errors arising from thin conducting regions, that replace volume thin regions by surfaces but neglect border effects in…

Modern automobiles have been turning more and more into wireless sensor and communication networks. Accordingly, the number of radio systems is steadily increasing. Due to strict safety requirements, these radio systems need to be tested extensively for functionality and reliability, especially under poor radio channel conditions. Beside the large electrical size of cars at frequencies…

The frequency dependent grid impedance at the terminals of an electrical supply grid is an essential parameter for power quality and grid feedback analysis. In this contribution the identification of the grid impedance is achieved using spectral excitation currents at the corresponding grid connection point, which generate measureable changes in the grid voltage spectra. Different…

There is no doubt that the wind was the renewable source of energy that had the most significant growth during the last five years, and more importantly, the wind power source in Brazil has always been the cheapest and most competitive of all the others, so it is worth saying that wind have never been…

Usually, after properly biasing an analog circuit we need to linearize its transistors in order to linearize the entire circuit for performance analysis and design. This linearization is done through modeling of devices, which is becoming more and more complicated as the electronic technology advances. This is not of course a major issue for circuit…

In this research paper, the development and evaluating of a smart controller for electrical powered wheelchairs are presented. The controller aimed to assist quadriplegic, paralyzed, and handicap patients who cannot use their hands to drive an electrical wheelchair by using a joystick controller. Two sub control units have been combined in one hybrid system to…

As a result, outdoor travelers, tourists and businessman who utilize portable electronic devices often experience battery depletion of their devices without the means of charging their device. The number of Wi- Fi access point continues to increase. There are many occasions where it is desirable to acquire energy from many radio frequency stations, while charging…

This work introduces the design and prototype development of a novel optical-based fingertip force sensor, which is integrated in a bio-mimetic finger for robotic and prosthetic manipulation. Given the optical nature of the sensor, the proposed device is free of any electrical and metal components. Accordingly, the design improves manipulation of objects with high electromagnetic…

Moderate exercise has been implemented in spaceflight programs to prevent muscle and joint damage under extreme circumstances such as microgravity. Although the physical effects of exercise have been investigated experimentally, advanced modeling and simulation techniques are powerful tools that could provide insight into the physical limitations, optimal conditions, and mechanisms that might lead to muscle…

Log-periodic antennas have high electrical characteristics over a wide frequency range. The large length of the antennas is their significant disadvantage caused by the fact that each active region consisting of several radiators operates in a narrow frequency range. To extend this range, it is proposed to use radiators with concentrated capacitive loads, providing in-phase…

This paper is the extended reflection of work originally presented in conference of Electrical, Computer and Communication Engineering (ECCE)-CUET 2017, entitled “Automated Anti Collision System for Automobiles”. Automated collision avoidance system is a trending technology of science in automobile engineering. The aim of this paper is to design a system which will prevent collision from…

The contemporary electrical power systems (EPS) impose increased requirements for the functionality of the protection systems. The necessity of improved EPS stability is in some extent resulting of the increased integration of renewable sources of electrical energy. The future grid development gives perspective for connection of more converter based generations. The power electronic schemes and…

Reliable operation of a power transformer with a certain load depends on the technical condition of individual construction parts and the ability to prevent defects that can cause a failure. During the lifecycle of a transformer, valuable data is constantly accumulated, which forms the basis for technical or risk assessment of the equipment. Therefore it…

Through-Silicon-Vias (TSVs) are utilized for high density 3D integration, which induce crosstalk problems and impact signal integrity. This paper focuses on TSV crosstalk characterization in 3D integrated circuits, where several TSV physical and environmental configurations are investigated. In particular, this work shows a detailed study on the influence of signal-ground TSV locations, distances and their…

Microelectromechanical Systems (MEMS) are devices made up of several electrical and mechanical components. They consist of mechanical functions (sensing, thermal, inertial) and electrical functions (switching, decision making) on a single chip made by microfabrication methods. These chips exhibit combined properties of the two functions. The size of system has characteristic dimensions less than 1mm but…

This paper presents the modelling and analysis of permanent magnet synchronous generator (PMSG) which are used in direct driven small scale wind turbines. The 3 kW PM generator which is driven directly without gear system is analyzed by Ansoft Maxwell 2D RMxprt. The performance analysis of generator includes the cogging torque in two teeth, induced…

Listening to auditory stimuli during study can give positive and negative influence on human cognitive processing. Thus, it has attracted researchers to conduct studies using various types of auditory stimuli. Some researchers believe that Mozart music and white noise are able to give positive influence on cognitive performance. However, most of the past studies gave…

This paper is an extension of work originally presented in 2017 6th International Conference on Industrial Technology and Management (ICITM) [53]. This research focuses on the mobilization of human resources in the Asian electrical industry and analyzes the impact of engineers’ international mobility on the innovation of enterprises in the host countries. I examine the…

Epilepsy is a neurological disorder which is most widespread in human beings after stroke. Approximately 70% of epilepsy cases can be cured if diagnosed and medicated properly. Electro-encephalogram (EEG) signals are recording of brain electrical activity that provides insight information and understanding of the mechanisms inside the brain. Since epileptic seizures occur erratically, it is…

This paper presents on-chip testing structures to characterize and detect faulty Through Silicon Vias (TSVs) in 3D ICs technology. 3D Gunning Transceiver Logic (GTL) I/O testing is proposed to characterize the performance of 3D TSVs in high speed applications. The GTL testing circuit will fire different data patterns at different frequencies to characterize the transient…

Conformal metalization on mold compound offers new possibility for IC package design to improve features such as rigidization of the flexible core, heat sink capability, 3D-circuit patterning and the electromagnetic interference (EMI) shielding. With the unique processes, the fabrication technology had enabled to achieve the high reliable performance and had passed the electrical test. Following…

The concept of renewable energy is increasing day by day because the electrical applications are moving towards utilization of renewable sources and due to this factor electric power is also gaining ground and new type of converters are modelled in order to get high utilization of renewable sources. In this paper, two types of multiport…

Extensive increases in electricity cost added to the numerous power outages encountered in developing countries has led to the deployment of hybrid energy supplies that mainly ensure continuity of power supply while attempting a reduction of electricity generation cost. This paper, specifically deals with the cost optimization of electricity generation from a grid connected hybrid…

The Static Var Compensator (SVC) is used to improve the stability of the power system because of its role in injecting or absorbing the reactive power in the electrical transmission lines. The Power System Stabilizer (PSS) is also a control device which ensures maximum power transfer and thus the stability of the power system enhancement.…