Search Results

Gallium nitride (GaN) is expected to be used as a material for power semiconductor devices. However, it is crucial to focus on the dielectric properties of GaN. In this study, we investigated the transient response of the drain current during high-frequency application after intentionally maintaining the current collapse in the AlGaN/GaN high electron mobility transistors.…

As a result of rising expectations for quality, the employment of advanced technical requirements for future fifth-generation (5G) new radio is required. The error-correction coding method is one of the most important components of a new generation. The 5G NR New Radio Low-Density Parity Check (LDPC) codes, which have been adopted by the 5G standard,…

Metal Oxide Semiconductor Field-Effect Transistors are commonly taught in courses for electrical engineers as they are the most common components within integrated circuits. However, despite numerous papers and books on MOSFETs, students still struggle with understanding their behaviour, particularly in the saturation region. This paper presents an expanded explanation of MOSFET behaviour, with a consistent…

Continuously Variable Series Reactor (CVSR) is a device that can vary the reactance in an ac circuit by controlling the magnetization of a ferromagnetic core, shared by ac and dc windings. The bias dc current can change the equivalent ac reactance(inductance) in order to, for example, control load flow, damp oscillations, or fault current limitation.…

This paper describes the design of a phase shifter with electrically adjustable parameters employing only one voltage differencing gain amplifier (VDGA) and one floating capacitor. This circuit requires no external resistors, resulting in a resistorless design and a low component count. The proposed circuit implements a first-order all-pass filter response with electronic control of its…

Recently, the Multiple-input multiple-output (MIMO) antennas have been used a lot and attracted many researchers in advanced high-speed wireless communication systems. MIMO antennas are an essential part not only in access points but also in end-user devices. This technology allows a significant increase in channel capacity, but also lead to a challenge of minimize mutual…

Carbon nanotube field effect transistor (CNTFET) has a huge advantage over the Si- MOSFET. In MOSFET switching occurs by altering channel resistivity whereas in CNTFET switching occurs by modulation contact resistance. CNTFET generates three to four times of drive current than MOSFET. Transconductance of CNTFET is four times higher than the MOSFET. The average carrier…

The use of a battery to power an electrical or electronic system is accompanied by battery management, i.e. a set of measures intended to preserve it for preventative maintenance, thus the cost reduction. This management is generally based on two key parameters, the (remaining useful life) RUL and the (State-of-health) SOH, which relate respectively to…

The current paper focuses on the design of cascade control systems employed in photovoltaic (PV) powered microgrids (MG), which have been well received in remote agricultural farms in Ecuador. The study case is composed of a three-phase inverter powered by a DC-DC converter fed by a PV array and its control system. To simulate the…

This investigation demonstrates the analysis of various layout arrangements for oscillator (OSC) realized by CMOS technologies. Moreover, the analysis reveals that the serpentine style of OSC stages attains the minimum output variation on silicon. This investigation is firstly verified by post-layout simulations, comparing the variation with different kinds of layout arrangement for OSC designs, including…

Electrifying or connecting remote and isolated communities to the national grid is very difficult and expensive. This challenge is due to the geographic locations of these isolated communities and terrain that needs navigation when installing transmission lines to transmit power to the communities. This article presents a case study of the design of a hybrid…

In this paper, Compact bandpass filters have been designed. A single bandpass filter was designed using novel triple concentric complementary split-ring resonators placed along the microstrip line in the ground plane. Gaps and via were placed on the microstrip line to control electromagnetic characteristics, resulting in a single bandpass filter. In turn, spiral resonators were…

This article presents a roadmap for distribution grid µPMU hardware and software design consideration and implantation to ensure high performance within limited computational time of sampling frequency 512 samples/cycle. A proposed 12 channels, multi-voltage level µPMU hardware and rules of voltage and current transducer, analog filter, analog-to-digital converter, sampling rate definition, and PCB design and…

The NFC wireless charging feature is an extension of the NFC technology that can be implanted on wearables. The purpose of this paper is to show how to increase power transfer efficiency on both transmitter and receiver antenna systems. To demonstrate this problematic, firstly this paper gives an overview of how this NFC feature is…

A novel PVTL (Process, Voltage, Temperature, Leakage) detection circuit consisting of four individual detectors is proposed in the investigation. Voltage Variation Detector is composed of a feedback control block comprising multi-stage delay cells using high Vth devices such that 0.5% of VDD variation can be detected. Temperature Detector based on a current to pulse converter…

The focus of this work is first to establish the effect of the chip temperature and thermal feedback on the determination of the power loss in a three-phase propulsion inverter, then to demonstrate the possibility of achieving an improved heat spreading through the different layers inside a SiC power module by using graphene assembled films…

We propose and analyze new impedance matching schemes to enhance applied voltage to an optical modulator and light modulation for a subcarrier multiplexed light transmitter or a radio-on-fiber transmitter that carries radio-frequency signal through an optical fiber. Our proposal includes two methods using a quarter-wavelength impedance transformer and a tapered microstrip line for impedance matching…

Gate driver has been applied in many ways, exemplified by that, by using the DC-isolated and AC-pass characteristics of gate driver’s primary and secondary sides, the problem of floating endpoint in semiconductor power switch can be solved. However, the conventional design of isolated gate driver provides circuit voltage blocking by optically coupled components. Due to…

To effectively implement the social distancing or digital contact tracing in epidemic using an RSSI-based localization approach through Bluetooth beacon is one of the most widely used technologies, but simply using RSSI measurement is not more relevant because the RF signal is affected by several factors and the environment of usage. Traditional distance or positioning…

This paper presents the designs and the simulations of proposed structures of electronically frequency reconfigurable planar bow-tie antenna. In the first part, a modified wide band self-complementary bow-tie antenna is designed and implemented. In the second part, varactor and PIN diodes are integrated in top side to adjust electronically the modified structure of bow-tie antenna…

A reconfigurable Stepped Frequency Continuous Wave (SFCW) radar prototype for supporting the italian financial police to contrast smuggling, is proposed in this work. In particular, the proposed radar can provide information related to the container contents and the presence of false bottoms speeding up the control operations at borders and ports. Moreover, it is able…

Microcontrollers have revolutionized the field of Engineering Education. Their popularity and cost-effectiveness have opened a large door of activity for innovative projects at both the undergraduate and graduate levels. The purpose of this article is to review this activity in terms of where two of these microcontrollers have been used in Engineering Education so as…

At the conference “System timing, shaping and signal processing” “SYNCHRONO-2020” there was report: “Simulation of steady state microwave oscillator with dielectric resonator” and “Microwave generators, driven by voltage-based microassemblies with dielectric resonators”. An algorithm for calculating a generator with an open dielectric resonator is described. Based on the DesignLab 8.0 simulation environment, the analysis of…

The paper presents the technique for the user-friendly numerical simulation of coupled oscillators described by the Kuramoto model. Oscillators couplings are defined as arbitrary 2?-periodic functions given by the Fourier series. Matlab procedure was developed to generate netlist for the equivalent electrical circuit diagram of the Kuramoto model. The input data of the procedure include…

A new approach for designing RF energy harvester with a single stage converter circuit is presented in this paper. The proposed converter configuration is integrated with an antenna that is based on the coplanar waveguide (CPW) transmission line with improved gain resonated at 2.45 frequency ISM band. The CPW patch antenna as a harvester antenna…