There exists a profound difficulty of communication between the people that works in the EMC area in circuit terms and the people that works in field terms. In this paper we show that when the matter is predominantly distributed along a certain direction in space, as for transmission lines, the electromagnetic field can be divided…

The paper focused on the implementation of fuzzy logic technology for improved Wideband Code Division Multiple Access (WCDMA) network using selected Key Performance Indicators (KPIs). Empirical and analytical methods were principally deployed for the study analyses. Empirical analyses were conducted on two designated networks which are MTN and AIRTEL observed with high network traffic to…

Just as electricity has an essential role in our lives, the internet network and especially web services have become of vital importance nowadays. Without security service layers, apparently small things like checking a child’s school schedule on web may turn the daily routine into a nightmare. Web services users are still required to use many…

Our work demonstrates how to use contemporary software tools on older or “legacy” robots while keeping compatibility with the original control, tools, and calibration procedures. This is done by implementing a lightweight middle-ware called MDS-Ach connected directly to the hardware communications layer of the robot’s control system. The MDS-Ach middle-ware, which relies on the x-Ach…

The frequency dependent grid impedance at the terminals of an electrical supply grid is an essential parameter for power quality and grid feedback analysis. In this contribution the identification of the grid impedance is achieved using spectral excitation currents at the corresponding grid connection point, which generate measureable changes in the grid voltage spectra. Different…

Large power transformers generally include a customer request for a technically appropriate regulation unit. The selection process of the regulation unit consists of defining the required input data, performing mathematical calculations necessary to find the technical limit values that the regulation unit has to satisfy, and finally optimizing and selecting the appropriate regulation unit. The…

This article examines the use of non-ideal current and voltage sensors for sensorless speed control for a fixed field DC motor. A PID type speed controller with KF estimator was applied to control the DC motor and IAE, settling time, and peak overshoot were taken as performance indices. However, KF facilitated the noise reduction. After…

In today’s technology, 3D presentation is vital in conveying a realist and comprehensive understanding of a specific notion or demonstrating certain functionality for a specific device or tool, especially on the World Wide Web. Therefore, the importance of this field and how its continuous enhancement has become one of the dominant topics in web development…

In this paper an omnidirectional dual band monopole antenna at 28 GHz and 60 GHz which is fit for indoor and outdoor wireless applications is developed. The proposed antenna consists of two rectangular patches with a T folded patch. The design, analysis, and optimization processes through this article are executed by the numerical method, Finite…

Driven by today’s market demand, semiconductor is pushing towards the zero-defect direction. The improvement demanded in semiconductor manufacturing is becoming increasingly challenging. In this paper, common molding defects comprise of voids, incomplete fills, and piping holes are studied systematically, focusing on three key areas: 1) Potential mold flow weakness; 2) Molding temperature stability; as well…

Space debris removal is currently a critical issue for space development. It has been reported that five pieces of debris should be removed each year to avoid further increase in the amount of debris in orbit. One approach for the removal of multiple pieces of debris is to launch multiple satellites that can each remove…

The application of protective coatings is the primary method of protecting marine and offshore structures from corrosion. Coating breakdown and corrosion (CBC) assessment is a major aspect of coating failure management. Evaluation methods can result in unnecessary maintenance costs and a higher risk of failure. To achieve a comprehensive collection of data for CBC assessment,…

Distraction, drowsiness, and fatigue are the main factors of car accidents recently. To solve such problems, an Eye-tracking system based on camera is proposed in this paper. The system detects the driver’s Distraction or sleepiness and gives an alert to the driver as an assistance system. The camera best position is chosen to be on…

Service providers are transferring their static optical transport networks from semi-permanent connections to agile automatic switched optical networks (ASON) with dynamic optical connection provisioning and restoration. To achieve this goal, service providers are looking for flexible optical network ROADMs with CDC capabilities. Although many contention scenarios during network connection provisioning and restoration have been illustrated,…

This paper investigates the electronic book production and distribution practices adopted by the Publishers in Southeast Nigeria because of the global growing interest in writing new book titles in digital form as well as converting paper titles to digital content. To investigate this study, the researcher formulated three research questions to guide the study. A…

Considering link vibrations, the main limitation affecting flexible manipulators, this article seeks to make a contribution by presenting an enhanced two degree of freedom vibration controller. This controller uses a filtered right inverse controller in the feedforward and strain feedback controller in the feedback path. The Filtered inverse controller damps transient vibrations while preserving joint…

The paper presents design and implementation of a mobile robot, located in an accommodation. As opposed to other known solutions, the presented one is entirely based on standard, cheap and accessible devices and tools. An algorithm for transformation of the 2D coordinates of the robot into 3D coordinates is described. The design and implementation of…

Domain specific modeling (DSM) has become popular in the software development field during these last years. It allows to design an application using a domain specific modeling language (DSML) and to generate an end-solution software product directly from models. However providing a new DSML is a complex and costly job. This can be reduced by…

Brain tumor is the abnormal growth of cancerous cells in Brain. The development of automated methods for segmenting brain tumors remains one of the most difficult tasks in medical data processing. Accurate segmentation can improve diagnosis, such as evaluating tumor volume. However, manual segmentation in magnetic resonance data is a laborious task. The main problem…

The power market in China is faced with problems such as the continuous widening of terminal load peak-valley difference and the imbalance between supply and demand. Under this background, this paper to establish the mathematical model of the contract price of active demand response. The first is to consider the load component of the user’s…

Facility location problem is a problem that many organizations still face today because of its increasing constraints and objectives. Decision makers want this problem solved in order to maximize profit and as such, it became a field of interest to many computer scientists over the years. The solution tool used by these scientists; a function…

In recent years, research on game AI has expanded, and now it has become possible to construct even AI of complex games. In accordance with this trend, we constructed the AI of the Hanafuda with a certain degree of complexity. Because of applying the method used in other games to the ball game, we could…

This paper reports on an empirical study (an extension of a pilot study) that analyses the design of icons in a German 3-D virtual art gallery interface. It evaluates the extent to which a sample of typical computer users from a range of ages, educational attainments and employments can interpret the meaning of icons from…

In this research work, we are implementing a student performance evaluation model using Mamdani Fuzzy Inference System (FIS) and Neuro Fuzzy system and comparing the results with classical averaging method for Network Analysis (NA) course studied by third semester Electronics and Communication Engineering students. This work explains the designing of scoring rubrics using Bloom’s levels…

Due to their efficient flight control systems and their camera of high quality modern drones can fly precisely and take aerial photos of high resolution. Although these multi-rotor devices are not able to fly long distances yet, they are very efficient instruments for taking aerial photographs of their proximate environment. As they are able to…