The following document analyzes the current situation in mobility and intelligent transportation in Colombia and in some cities around the world. Presenting several cases of success and implementation of technologies and protocols that seek to improve the problems with the greatest impact in today’s cities, such as traffic congestion, environmental impact, accessibility, and road safety.…

At the conference “System timing, shaping and signal processing” “SYNCHRONO-2020” there was report: “Simulation of steady state microwave oscillator with dielectric resonator” and “Microwave generators, driven by voltage-based microassemblies with dielectric resonators”. An algorithm for calculating a generator with an open dielectric resonator is described. Based on the DesignLab 8.0 simulation environment, the analysis of…

Organizations make use of different tools and methods to test and evaluate software, for quality and appropriateness purposes. However, many organizations are unable to perform multiple testing activities (manual, automation and performance testing), using a single tool. As a result of limitation of some tools, some organizations are hampered in their attempt to test software,…

Aiming at the problem of fatigue driving, this paper proposed a driver fatigue tracking and detection method combined with OpenMV. OpenMV is used for image acquisition, and the Dlib feature point model is used to locate the detected driver’s face. The aspect ratio of eyes is calculated to judge the opening and closing of eyes,…

Efficient real-time clustering is a relevant topic in big data streams. Data stream clustering needs necessarily a short time execution frame with bounded memory utilizing a one-scan process. Because of the massive volumes and dynamics of data streams, parallel clustering solutions are urgent. This paper presents a new approach for this trend, with advantages to…

The Present work is to investigate effect of dry sliding wear behaviour of ZA27 base alloy, after reinforcing it with Molybdenum Di Sulphide (MoS2) particles from 0% to 4% in five steps. To examine the wear behaviour of both reinforced and un-reinforced material, dry or unlubricated pin on disc tests were conducted. These tests were…

The Present work is to investigate effect of dry sliding wear behaviour of ZA27 base alloy, after reinforcing it with Molybdenum Di Sulphide (MoS2) particles from 0% to 4% in five steps. To examine the wear behaviour of both reinforced and un-reinforced material, dry or unlubricated pin on disc tests were conducted. These tests were…

The field of view (FOV) and spatial resolution (SR) are the major image quality parameters which are being optimized in neutron radiography (NR) technique. This requires effective components selection during the design of NR detector systems. The selection is a discouraging task owing to often having conflicting experimental requirements and related constraints. In this work,…

Erosion affects large parts of Moroccan land, particularly in the mountains leading to soil quality deterioration and less vegetation cover. Located in the South-west of Morocco, the Site of Biological and Ecological Interest (SBEI) of Ain Asmama, where erosion threatens a major part of the region was investigated. The site has a terraced transitional bioclimate,…

Virtual reality (VR) is finding applications in a wide range of industries; however, a significant number of users find VR experience considerably different from the real-world experience. To match the real-world experience, the VR experience should look real, should be immersive, and be in line with the users’ anticipation. Achieving realism in the virtual representation…

Collaborative E-learning is highly dependent on the well functioning of a complex socio-technical system that comprises information technology and various social processes. Large-scale infrastructures like the National Research and Education Networks (NRENs) provide access to research and educational resources and provide collaboration between educational and research organizations, thus providing a set of essential services for…

Data mined from social media can be used in a variety of methods. The goal of this paper is to explore some of the various methods of mining data from social media and the different areas of its applications. From the analysis of other studies, it was clear that methods such as text analysis, classification,…

Encouraged by the huge publicly available genomic databases, research in the field of steganography was recently extended to utilize DNA sequence data to conceal secret information. As an extension of the work presented earlier by the author, this paper proposes an approach for a secure data communication channel between two parties. At one side of…

During the past years, a lot of research work have been done on the topic of smart grids and more specifically on the charging of electric vehicles (EVs), which will become an essential aspect in the coming years. The various works carried out on these themes have allowed the development of efficient tools to organize…

The TAM is a model that is widely used to understand IT adoption and usage process accordingly and the reason for its popularity is that the model clarifies variances like behavioral intention (BI) relevant to IT appropriation and use over a broad range of settings. The model’s main factors for system use is perceived usefulness…

Distributed Solar Photovoltaic (DSP) Plants are one of the fastest growing renewable energy systems in South Africa. The primary components forming an integral part of the point of common coupling (PCC) are, the inverter used to convert dc voltage to ac voltage and step-up transformers which step-up low voltage input to the desired output level.…

General relativity and its modified theories are unable to account for quantum mechanics and cannot explain dark matter or the origin of the gravitation. This paper presents a theory that describes how Newtonian gravitation originates at the level of the particle, and how particles induce gravitation and respond to the source of gravitation. This paper…

This paper details an extension to the SLIP model named spring-loaded inverted pendulum model with swing legs (SLIP-SL). SLIP-SL extends the SLIP model by introducing swing leg dynamics while keeping its passive nature. This way, reference trajectories for the center of mass and swing foot trajectories can be simultaneously obtained which was not possible with…

Fuel Cells (FCs) and Combined Cooling, Heating and Power (CCHP) systems are becoming very popular due to their environmental friendliness and immense applications. This extended review paper commenced by introducing the rampant South Africa’s electricity crisis as the basis for the study, followed by some structural analyses of up to forty-four miscellaneous power electronics converters…

This paper is an extended version of the work presented at a conference held in Kyiv, Ukraine, in October 2020, which reported the result of the numeric simulation on the artificial antigravity. This paper further describes the derivation of the idea of the artificial antigravity, and adds the simulation of angular momentum that is needed…

The construction industry has undergone several changes in recent years linked to new laws and international conventions aimed at protecting the environment and combating pollution. Construction industry alone produces tons of waste annually due to debris produced either during construction or during deconstruction. To combat this, companies are forced to control their debris either by…

Environmental sounds detection plays an increasing role in computer science and robotics as it simulates the human faculty of hearing. It is applied in environment research, monitoring and protection, by allowing investigation of natural reserves, and showing potential risks of damage that can be deduced from the environmental acoustic. The research presented in this paper…

The design, fabrication and testing of a power availability recorder (PAR) to track the duration of electricity supply in facilities is presented. The design was executed with C-Language encoded in a microcontroller which served as the central processing unit of the device. Proteus software was, subsequently, used to simulate the real-life practicability of the device…

The increasingly rapid development of science and technology, as well as the influence of globalization has contributed to updates in educational so that one method taken by apply experiments in horticulture learning activities. This study aims to determine the effect of rice straw mulch on tomato production and the effectiveness of the implementation of this…

In recent years, the applications in the field of Unmanned Aerial Vehicle (UAV) systems has procured research interests among various communities. One of the primary factors being, thinking beyond the box of what could UAV system bring to the table other than military applications? Evidence to any answer for this question is the current day…